Wanted: a few parts at Burleigh (wing, indicator, etc)

[citroenxm]

John, I think the Mk.2 units are a different size, but im not certain, I know the houses are different...

[Dieselman]

There is nothing for the bulb to hold on to. Note the lack of the grey circular metal holder under the clamp.

That is the bulb.

[xmexclusive]

Hi Eddie N

Just found a Mk2 lamp in the garage heap.
The metal bulb holder is identical to the one in the photo.
I will recover a bulb holder and include it in with the other item I need to send you.

John

[jamescarruthers]

This is all very nice but has anyone got the bits I requested?!

[xmexclusive]

Hi James

Only collect Mk2 bits these days so have few of the bits listed.

Mk2 wings differ in the shape of the indicator hole and the pressing for the scuttle trims.
Bottom end rusting is also a problem as well.
The few saved Mk1 wings over here are likely to be stored by collectors for potential reuse.
If no one has offered I can only suggest you try Frederick in France where road salt rusting is not such a major issue.

No Mk1 fog lights so again try Ferderick.

Have a Mk 2 slider cassette with the black tape.
It may fit directly or you can pillage it for the tape.

The cones are torn on most of my recovered front speakers.
Wattage varies with model, 20, 30 & 40 watt were fitted to different models.
Best option might be replacing with new both sides.
Some postings about suitable ones on the site.

I have spare sunroof gear motors and could send one or just the cog.

Not expecting to get to rallies at present so PM me if interested in any of my bits.

John

[jamescarruthers]

Good to know, although disappointing, that Mk. 2 wings are different.

Thanks John, I will look you up after the meet next weekend. You never know I might get a few bits there!