1994 VSX CT auto BREAKING

[SteveLP]

Hi Jon
Could I have the covers on the Maxi fuses by the main fuse box and the plastic cover that covers the nut on rear wiper please?
Oh also the coolant expansion tank if still available!
Cheers
Steve

[Citjon]

Hi Steve,
Sorry but the expansion tank has already gone. I think I've got the other bits, is it the fuse part with the yellow locking bits?
Regards,
Jon

[wesacosa]

as per the PM about window clips....

Screenshot_20240815_212402_Chrome.jpg

the peg arrowed yellow runs through the glass and the removable clip arrowed in blue holds it in place

Screenshot_20240815_212402_Chrome.jpg

The peg attachment is really flimsy though so can snap easily as both of mine have

[SteveLP]

Hi. On your photo the big fuses are next to the main fuse box in front of the air filter housing. It is the covers I need but you could just unscrew the lot and I'll have it.
The rear windscreen wiper nut-cover should just pull off.
If the passenger side windscreen washer bottle is there that would be nice to have too, but probably a pain to post. So maybe just the washer motors?
-
Other thing I'd like is the accumulator/regulator as mine is dripping from somewhere!

Thanks
Steve

[Citjon]

as per the PM about window clips....
Screenshot_20240815_212402_Chrome.jpg

the peg arrowed yellow runs through the glass and the removable clip arrowed in blue holds it in place
Screenshot_20240815_212402_Chrome.jpg

The peg attachment is really flimsy though so can snap easily as both of mine have

OK I'll have a look at these next time I'm at the workshop

[Citjon]

Hi. On your photo the big fuses are next to the main fuse box in front of the air filter housing. It is the covers I need but you could just unscrew the lot and I'll have it.
The rear windscreen wiper nut-cover should just pull off.
If the passenger side windscreen washer bottle is there that would be nice to have too, but probably a pain to post. So maybe just the washer motors?
-
Other thing I'd like is the accumulator/regulator as mine is dripping from somewhere!

Thanks
Steve

I agree about the washer bottle, although I could send it separately? The other option is to meet at Chevrons if you're going?

I've already sold the regulator but might have another one, although I cannot vouch for the condition.

[Dieselman]

If there isn't regulator available, a new set of O rings normally fixes any leaks.
Sphere seal: 5272 15 : 37,4 * 42 * 2,6

Cut out O ring: 96157730 : 37 * 33 * 1,9

Cut in o ring: 96157736 : 29 T2,7

Pressure relief bolt O ring: 4026 82 : 6-TO 1,9

I might be incorrect here, but don't sinkers and anti-sink have different number of pipes out of the regulator, as there is no longer a connection to the Fdv.

Early series 2 one is 5274 15

The one for the Es9j is 5274 18

see: https://www.catcar.info/citroen/?lang=e ... aWVyPT0%3D

[Citjon]

as per the PM about window clips....
Screenshot_20240815_212402_Chrome.jpg

the peg arrowed yellow runs through the glass and the removable clip arrowed in blue holds it in place
Screenshot_20240815_212402_Chrome.jpg

The peg attachment is really flimsy though so can snap easily as both of mine have

Managed to extract it without any breakages!

[m0rda]

Have you got headlight washer jets? I am interested in left-side one.
Both headlight washer caps are of interest, too.

[Citjon]

Have you got headlight washer jets? I am interested in left-side one.
Both headlight washer caps are of interest, too.

I need the covers for my car but might have spare washer jets.