'96 XM 2.1 Hatch 2.1 TD Front Struts/Strut Tops F/S
Posted: Mon Jan 21, 2013 11:38 am
These are the Swedish made DIY strut tops. Well made and cost £150.
Each top arrives in two halves. After removing the rusty 'cone' shaped part (the part that fails) the new cones are assembled around the strut. They are strong enough when just bolted together on the car but for extra strength they can be tack welded in place.
These strut tops are now on my XM struts and tack welded in place. They could easily be removed from the current struts and remounted if needed. Some rubber bonding agent will be required. They came supplied with some but the amount was pitifully small.
Value wise I'm not sure what to ask, but you'll get two struts with these Swedish tops already fitted.
Please feel free to ask questions. £75 the lot
located in CF38
Each top arrives in two halves. After removing the rusty 'cone' shaped part (the part that fails) the new cones are assembled around the strut. They are strong enough when just bolted together on the car but for extra strength they can be tack welded in place.
These strut tops are now on my XM struts and tack welded in place. They could easily be removed from the current struts and remounted if needed. Some rubber bonding agent will be required. They came supplied with some but the amount was pitifully small.
Value wise I'm not sure what to ask, but you'll get two struts with these Swedish tops already fitted.
Please feel free to ask questions. £75 the lot
located in CF38