Page 1 of 1

WANT: Wiring for Radio & plastic cover

Posted: Sun Aug 28, 2016 3:19 pm
by Payschel
Hello to all,

I am looking for few things which i cannot find in my country (Czech Rep).

Looking for - Wires from Radio(Original Philips Y4) to CD changer (atleast some connectors, or documentation), and from radio to Steering wheel multifunction.

and black plastic cover around Radio ( to cover that holes and so on).

I have Citroen XM 2.1TD Y4 1997.


thanks a lot for any help :-)

regards
Pavel

Re: WANT: Wiring for Radio & plastic cover

Posted: Sun Aug 28, 2016 4:52 pm
by citroenxm
Y4 radio cover is different to Y3 . Y4 cover is only meant to cover the empty radio space and NOT cover the radio

if you want to cover the radio and spare space you need the full unit with front flap and cigarette unit complete from a Y3. They are only screwed to the console trim and after removing the whole centre console unit you can see the screws in the back to change them.

I should be able to find a Y3 unit with full size flap if thats what you want to do.

I cannot help with the wiring I only have Y3 wiring and they are different to Y4.

Re: WANT: Wiring for Radio & plastic cover

Posted: Sun Aug 28, 2016 4:54 pm
by Payschel
I mean that Y4 cover for Radio itself, around it like frame. I have that small one above radio, thats OK for me, but Radio itself dont look good :-(.

Re: WANT: Wiring for Radio & plastic cover

Posted: Sun Aug 28, 2016 7:16 pm
by citroenxm
Ahhhh ME bad, I didnt read properly, you want plastic around the edge of the radio... Sorry..

Re: WANT: Wiring for Radio & plastic cover

Posted: Sun Aug 28, 2016 7:24 pm
by Payschel
Exactly :-) ... + wires from wheel to radio and to CD changer :-D got all of them but cant use that -.-