I'm in urgent need for a crank from a H reg XM 2.0 petrol. That or a good engine I can rob the crank out of. Sadly the one we have is 12 thou bent and no2 big end is 24 thou knocked out. I'd even settle for info on crank compatibility from other cars.
Many thanks for any help you can give.
Wanted: Crank or engine
- Dean
- Global Moderator
- Posts: 6116
- Joined: Wed Apr 15, 2009 7:53 am
- Location: Isle of wight
Re: Wanted: Crank or engine
This is listed as an XU10J crankshaft but it is from an XU10J4, yours is an XU10J2, I think the cranks are the Same but you may have to compare specs with the seller
https://www.ebay.co.uk/itm/RECONDITION- ... ect=mobile
https://www.ebay.co.uk/itm/RECONDITION- ... ect=mobile
92 Citroen XM Prestige 3.0i Auto R.P5678
14 Mitsubishi L200 Trojan
89 Talbot Express 2.0 coach built Auto-trail Chinook
Addicted to Crackanory
14 Mitsubishi L200 Trojan
89 Talbot Express 2.0 coach built Auto-trail Chinook
Addicted to Crackanory
-
- Global Moderator
- Posts: 14419
- Joined: Thu Jun 18, 2009 6:44 pm
Re: Wanted: Crank or engine
That should be good to use.
The later p/n for an 8v atmo, turbo and 16v atmo it 0501.G1.
As John has said, it wil need appropriate shells.
There shouldn't be any shortage of 2.0i-16v engines knocking about if an 8v is too difficult to source.
The later p/n for an 8v atmo, turbo and 16v atmo it 0501.G1.
As John has said, it wil need appropriate shells.
There shouldn't be any shortage of 2.0i-16v engines knocking about if an 8v is too difficult to source.
91 3.0 sei M. 4852 EXY Black
92 2.1 sed M. 5740 ECZ Sable Phenicien
92 3.0 V6-24. 5713 EXY Black
92 2.1 sd M. 5685 ENT Blue Sideral
Prev
90 2.1sd M. 5049 EJV Mandarin
92 2.1sd A. 5698 EJV Mandarin
94 2.1sd A. 6218 ERT Triton
91 2.0si M. 5187 EWT White
92 2.1 sed M. 5740 ECZ Sable Phenicien
92 3.0 V6-24. 5713 EXY Black
92 2.1 sd M. 5685 ENT Blue Sideral
Prev
90 2.1sd M. 5049 EJV Mandarin
92 2.1sd A. 5698 EJV Mandarin
94 2.1sd A. 6218 ERT Triton
91 2.0si M. 5187 EWT White
-
- XM newbie
- Posts: 4
- Joined: Sun Jul 28, 2019 5:37 pm
Re: Wanted: Crank or engine
Thanks guys. I've spoken to Bradford grinders before. Small world. I'll give them a ring tomorrow. Brilliant if it works out.

