Dieselman wrote:I'm interested to see the heater box come out. Can't the dashboard and heater be removed as one?
William, I have the answer for you today!
The dash comes away as we seen before on its own.. then the harness needs moving away to one side or out completely (plugged both ends) then theres a number of 10mm bolts for the heater box, to at the back in the car, one at the front bottom on the floor, and two in the engine bay for the heater..
Then in the sctuttle, theres also these two that need to come away:
Then the complete pedal box frame comes out as one AFTER these are all removed..
Above: The two in the double washer come out for the pedal box, the upper right hole os one of the 10mm bolts that hold the heater box.
and theres two 10mm each end of the frame inside the car..
Then, disconnect the parking brake cable, and clutch and throttle if still connected and then you can do this:
and be left with this:
So, after this, I know know how they are built. Its impossible to get the heater box out of the car with the frame work in place due to the retaining frame. This tells me then that the Heater IS the first thing to go in the car when being built, or at least the pedal box frame and heater. The rest is built around it.
