Wanted - couple of little bits series 1.5 xm

Selling off one (or bits :o) of your XM collection, or perhaps searching for those elusive headlight washer covers? This is the place to do it.
Post Reply
Vince
Citroen go-to-guy
Posts: 798
Joined: Sat Jan 23, 2010 4:29 pm

Wanted - couple of little bits series 1.5 xm

Post by Vince » Wed Jul 23, 2014 9:13 pm

Hi guys,

Im looking for a replacement tweeter (speaker) on my xm. I don't need the grill etc, just the small round speaker that sits beneath it ;)

I also need a front wheel arch rubber grommet from the passenger side. Its the one on the front edge of the wheel arch liner....like a rectangle with round edges :)

Can anybody help?

Thanks
Vince

citroenxm
Global Moderator
Posts: 9987
Joined: Wed Apr 15, 2009 9:11 am
Location: North Wales - FAR far far away!!! :-p

Re: Wanted - couple of little bits series 1.5 xm

Post by citroenxm » Wed Jul 23, 2014 10:25 pm

Tweeter galore here vince. Im suprised to see you even asking!!

Prehaps a pic of the said grommet??
Projects:(eventually if theres any bodywork left)
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual

Others
In use.. 1995 M reg S2 2.1td auto exclusive

Vince
Citroen go-to-guy
Posts: 798
Joined: Sat Jan 23, 2010 4:29 pm

Re: Wanted - couple of little bits series 1.5 xm

Post by Vince » Wed Jul 23, 2014 10:48 pm

Hi Paul I was hoping you'd pop up : ) Thought youd have a load :lol: Mine broke off at the connector on the speaker..i wondered why it kept stopping working.

Ill post the grommet picture up yes, trust me you'll have one im sure ;) I think they were standard on all xm's

Hope you're well ;)

User avatar
russ92xmsed
Global Moderator
Posts: 5733
Joined: Mon Jun 11, 2012 5:23 pm
Location: Cheltenham
Contact:

Re: Wanted - couple of little bits series 1.5 xm

Post by russ92xmsed » Wed Jul 23, 2014 11:12 pm

Vince, the grommets can be found in the boots of any pug 106 or saxo. I found two in a local scrapyard a few years ago. Best thing is, they will be in great condition.
Russ

1992 K reg XM 2.1 Auto SED RP 5712
1992 K reg XM 2.1 Auto SED RP 5705 (D)
Also
2003 C5 2.2 HDI Exclusive

I sell Engine bay, 1990 COTY, Total & Club XM Sticker Decals
http://www.rjwcreativedesign.co.uk

xmexclusive
Global Moderator
Posts: 5925
Joined: Wed Apr 15, 2009 8:11 am

Re: Wanted - couple of little bits series 1.5 xm

Post by xmexclusive » Thu Jul 24, 2014 8:53 am

Hi Russ

There is a pair behind the rear bumper of an XM as well.

John

User avatar
russ92xmsed
Global Moderator
Posts: 5733
Joined: Mon Jun 11, 2012 5:23 pm
Location: Cheltenham
Contact:

Re: Wanted - couple of little bits series 1.5 xm

Post by russ92xmsed » Thu Jul 24, 2014 12:10 pm

Is there. I did not know that. Just knew of the front ones.
Russ

1992 K reg XM 2.1 Auto SED RP 5712
1992 K reg XM 2.1 Auto SED RP 5705 (D)
Also
2003 C5 2.2 HDI Exclusive

I sell Engine bay, 1990 COTY, Total & Club XM Sticker Decals
http://www.rjwcreativedesign.co.uk

Vince
Citroen go-to-guy
Posts: 798
Joined: Sat Jan 23, 2010 4:29 pm

Re: Wanted - couple of little bits series 1.5 xm

Post by Vince » Thu Jul 24, 2014 10:01 pm

Are there? very interesting.....does anyone have an OE number? I could buy two brand new ones then,,,they wont be dear :)

XMX
Could do a 2.1 headgasket
Posts: 1171
Joined: Tue Oct 20, 2009 11:08 am

Re: Wanted - couple of little bits series 1.5 xm

Post by XMX » Fri Jul 25, 2014 3:05 pm

Vince wrote:Are there? very interesting.....does anyone have an OE number? I could buy two brand new ones then,,,they wont be dear :)
Hi Vince ! Did you not read my comment/post in THIS thread :?
XMX wrote:
Vince wrote:Hi, what condition are the side door mouldings in...chrome trim wise? They are interchangeable with MK1's arent they?

Also on the front edge of the inner wheel arch liners there is a medium sized rubber oval grommet which when removed exposes the bumper bracket etc...i could with one of those too :)
Hi Vince,

I've just taken a look on the poly-bag that they come in 5's, (I have four new ones still) and the part no's is #6988.52

:idea: if you have a breakers yard near you, go on a raiding party for some !

See THIS thread for more info ;)

XMX
Just called the Main Stealer's, £1.43 + VAT each !

:lol:
An XM if for life, (Not just for Christmas) !

User avatar
djg
Could do a 2.1 headgasket
Posts: 1181
Joined: Sun Jan 19, 2014 9:28 am
Orga / RP numbers: 7261
Location: Budapest, Hungary
Contact:

Re: Wanted - couple of little bits series 1.5 xm

Post by djg » Fri Jul 25, 2014 3:20 pm

For something as cheap and easily available as this there is no need but for everything else similar, we have a shop here that stores every conceivable trim clip, cable and harness fastener, trim screw, captive nut and grommet out there in the wild. You just go there with a sample and they'll find one or a dozen in one of their thousand little boxes. They don't really care what make and model it's for... You'll probably have something similar in the UK, won't you?
Bye,
Gábor

1996 XM 2.5 Turbo D VSX (LHD, Bleu Mauritius)
1986 BX 19 TRI Break (LHD, Rouge Vallelunga) deceased
1996 AX 14 D (LHD, Alaska White) in family

Vince
Citroen go-to-guy
Posts: 798
Joined: Sat Jan 23, 2010 4:29 pm

Re: Wanted - couple of little bits series 1.5 xm

Post by Vince » Fri Aug 08, 2014 10:37 pm

XMX wrote:
Vince wrote:Are there? very interesting.....does anyone have an OE number? I could buy two brand new ones then,,,they wont be dear :)
Hi Vince ! Did you not read my comment/post in THIS thread :?
XMX wrote:
Vince wrote:Hi, what condition are the side door mouldings in...chrome trim wise? They are interchangeable with MK1's arent they?

Also on the front edge of the inner wheel arch liners there is a medium sized rubber oval grommet which when removed exposes the bumper bracket etc...i could with one of those too :)
Hi Vince,

I've just taken a look on the poly-bag that they come in 5's, (I have four new ones still) and the part no's is #6988.52

:idea: if you have a breakers yard near you, go on a raiding party for some !

See THIS thread for more info ;)

XMX
Just called the Main Stealer's, £1.43 + VAT each !

:lol:
Fantastic, thanks Matthew

Post Reply