XM 2.0L TURBO wanted
) of your XM collection, or perhaps searching for those elusive headlight washer covers? This is the place to do it.-
Tonks
- Can find the S1 radio
- Posts: 12
- Joined: Fri Oct 26, 2012 10:17 am
XM 2.0L TURBO wanted
My 1998 xm vsx with 125,000 miles has a blown turbo. In bits on my bench needing a new shaft which I cannot obtain. I have bought a new compressor wheel and repair kit but I have decided to replace with a used turbo.
-
kingp
- Could do a 2.1 headgasket
- Posts: 1109
- Joined: Fri Aug 09, 2013 8:11 pm
- Location: Near Warrington
Re: XM 2.0L TURBO wanted
Best bet would be to send it off to a rebuilders as a used turbo could be in the same state shortly after you fit it and is it worth the pain to do it all again for a few quid saved?
-
citroenxm
- Global Moderator
- Posts: 9987
- Joined: Wed Apr 15, 2009 9:11 am
- Location: North Wales - FAR far far away!!! :-p
Re: XM 2.0L TURBO wanted
There should be loads of blowers for these. Ask the peugeot boys and those who have binned an original for a hybrid unit or something should have one sitting around at a guess.
Projects:(eventually if theres any bodywork left)
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual
Others
In use.. 1995 M reg S2 2.1td auto exclusive
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual
Others
In use.. 1995 M reg S2 2.1td auto exclusive
-
Tonks
- Can find the S1 radio
- Posts: 12
- Joined: Fri Oct 26, 2012 10:17 am
Re: XM 2.0L TURBO wanted
The biggest problem with the TB25 turbo is that they were only made for Citroen and Peugeot so new parts are getting difficult. I have been talking to Turbo Rebuild Ltd. who have been very helpful but unfortunately do not have the turbine wheel and shaft. We are trying to ascertain if one from a T25 will fit. Thanks for the Peugeot route. I will visit my local Peugeot breaker.