Wanted: a few parts at Burleigh (wing, indicator, etc)

[jamescarruthers]

I am fairly sure I am going to this thing at Burleigh. If anyone who is coming also could provide the below I'd be very pleased.‎

A driver's side wing (Delage Red if I am very lucky, if not I'll get one painted)

‎Passenger's side fog-light/indicator unit for a Mk. 1 with the locking tab intact (mine currently ty-wrapped in‎)

Interior fresh-air/recirculate slider. I have the knob but not the sliding cover piece that must slide up and down to cover the gaps (does that make sense?)

A front door speaker

Sunroof motor gear wheel (a BX one would do apparantly)‎

[jamescarruthers]

IMG_20160216_195238.jpg

The fresh-air/recirculate slider bit is to cover up the massive chick of light a night picture above. Hope that helps make clear what I am after.

[Dieselman]

That slider blank is a plastic ribbon that has a slot in it for the knob to project through.

If necessary, you could make one.

[citroenxm]

You will have to paint a wing.. Yours is the only car i have ever seen in that colour.

[MTXM]

I fear that Paul may be right on the wing!! Regards, Matthew T.

[citroenxm]

I know... Spent 7 years around that car and the only one ive ever seen that colour.

[jamescarruthers]

Not a biggie as the paint on the rear quarters needs done anyway. Not sure how to recreate the stripe though!

[MTXM]

Any good bodyshop should be able to apply the stripe James, that is assuming that you are not painting yourself! Regards, Matthew T.

[Southerneruk]

The stripe might be just a transfer

[jamescarruthers]

True, it's just getting the stripe to match is the problem. I had the car buffed and polished at work and most of the paint came up okay. The rear flanks is just poor quality paint from probably a repair over a decade ago and won't shine no matter what I do to it. 'Cheap celulose' the painter at work reckoned. You can't polish a chalk board!

If I can get a wing, he'll paint that, the rears plus spoiler to get this one looking nice.