WTD - 2.5td Turbo
-
- Can find the S1 radio
- Posts: 24
- Joined: Tue Aug 18, 2015 12:59 pm
WTD - 2.5td Turbo
Anyone got a good and not bust 2.5td Turbo unit sitting around?
Appears the seals have gone in mine so time for replacement (hopefully doable with engine in situ!)
Appears the seals have gone in mine so time for replacement (hopefully doable with engine in situ!)
-
- Can find the S1 radio
- Posts: 24
- Joined: Tue Aug 18, 2015 12:59 pm
Re: WTD - 2.5td Turbo
No-one got one 

-
- Global Moderator
- Posts: 5925
- Joined: Wed Apr 15, 2009 8:11 am
Re: WTD - 2.5td Turbo
Not got round to searching yet.
What is the criteria to assess the condition of anything I find.
John
What is the criteria to assess the condition of anything I find.
John
-
- Can find the S1 radio
- Posts: 24
- Joined: Tue Aug 18, 2015 12:59 pm
Re: WTD - 2.5td Turbo
End float movement John 
If it moves enough for the Vanes to touch the housings then its toast
If it still spins freely(spin up by fingers and if it rotates for a good few seconds longer before stopping) it should be fine.
Always a worry with stored ones if they have had oil kept in the bearing gallery to stop the surfaces starting to stick or rust together in some cases ive seen in the past

If it moves enough for the Vanes to touch the housings then its toast

If it still spins freely(spin up by fingers and if it rotates for a good few seconds longer before stopping) it should be fine.
Always a worry with stored ones if they have had oil kept in the bearing gallery to stop the surfaces starting to stick or rust together in some cases ive seen in the past

-
- Global Moderator
- Posts: 14452
- Joined: Thu Jun 18, 2009 6:44 pm
Re: WTD - 2.5td Turbo
You could buy a refurb kit for your own unit.
91 3.0 sei M. 4852 EXY Black
92 2.1 sed M. 5740 ECZ Sable Phenicien
92 3.0 V6-24. 5713 EXY Black
92 2.1 sd M. 5685 ENT Blue Sideral
Prev
90 2.1sd M. 5049 EJV Mandarin
92 2.1sd A. 5698 EJV Mandarin
94 2.1sd A. 6218 ERT Triton
91 2.0si M. 5187 EWT White
92 2.1 sed M. 5740 ECZ Sable Phenicien
92 3.0 V6-24. 5713 EXY Black
92 2.1 sd M. 5685 ENT Blue Sideral
Prev
90 2.1sd M. 5049 EJV Mandarin
92 2.1sd A. 5698 EJV Mandarin
94 2.1sd A. 6218 ERT Triton
91 2.0si M. 5187 EWT White
-
- Could do a 2.1 headgasket
- Posts: 1109
- Joined: Fri Aug 09, 2013 8:11 pm
- Location: Near Warrington
Re: WTD - 2.5td Turbo
I could but then I'd have to balance it after taking onenof the turbines off 
The chances are it wouldn't last too long when out of balance unless I got lucky and found somewhere that would sell a full cartridge/CHRA unit for it.

The chances are it wouldn't last too long when out of balance unless I got lucky and found somewhere that would sell a full cartridge/CHRA unit for it.
-
- Global Moderator
- Posts: 9987
- Joined: Wed Apr 15, 2009 9:11 am
- Location: North Wales - FAR far far away!!! :-p
Re: WTD - 2.5td Turbo
Nowt wrong with those CHRA cartridges
Projects:(eventually if theres any bodywork left)
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual
Others
In use.. 1995 M reg S2 2.1td auto exclusive
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual
Others
In use.. 1995 M reg S2 2.1td auto exclusive
-
- Can find the S1 radio
- Posts: 24
- Joined: Tue Aug 18, 2015 12:59 pm
Re: WTD - 2.5td Turbo
except they arent as common for the 2.5turbo 

-
- Global Moderator
- Posts: 5925
- Joined: Wed Apr 15, 2009 8:11 am
Re: WTD - 2.5td Turbo
Hi kps
Not found a recovered one when looking today.
Not worth disturbing the heaps as I cannot see anything to dig for.
Hopefully I will get a spare engine out on the engine crane this weekend ready to split off the gearbox.
Should be able to unbolt the turbo as the first job.
You got a preference as to what I unbolt with the turbo.
Later version of the 2.5 engine from an "S" reg estate.
John
Not found a recovered one when looking today.
Not worth disturbing the heaps as I cannot see anything to dig for.
Hopefully I will get a spare engine out on the engine crane this weekend ready to split off the gearbox.
Should be able to unbolt the turbo as the first job.
You got a preference as to what I unbolt with the turbo.
Later version of the 2.5 engine from an "S" reg estate.
John
-
- Global Moderator
- Posts: 14452
- Joined: Thu Jun 18, 2009 6:44 pm
Re: WTD - 2.5td Turbo
Some turbo specialaists, including (iirc) Turbo Technics didn't used to bother balancing them. They spin so fast couplsed with being small means that balance isn't an issue.kingp wrote:I could but then I'd have to balance it after taking onenof the turbines off
The chances are it wouldn't last too long when out of balance unless I got lucky and found somewhere that would sell a full cartridge/CHRA unit for it.
If you mark the turbine and shaft and refit with the marks lined up, it should be as balanced as it originally was...which may not be balanced at all.
It's already duff, so can't be made more duff than it is now.
91 3.0 sei M. 4852 EXY Black
92 2.1 sed M. 5740 ECZ Sable Phenicien
92 3.0 V6-24. 5713 EXY Black
92 2.1 sd M. 5685 ENT Blue Sideral
Prev
90 2.1sd M. 5049 EJV Mandarin
92 2.1sd A. 5698 EJV Mandarin
94 2.1sd A. 6218 ERT Triton
91 2.0si M. 5187 EWT White
92 2.1 sed M. 5740 ECZ Sable Phenicien
92 3.0 V6-24. 5713 EXY Black
92 2.1 sd M. 5685 ENT Blue Sideral
Prev
90 2.1sd M. 5049 EJV Mandarin
92 2.1sd A. 5698 EJV Mandarin
94 2.1sd A. 6218 ERT Triton
91 2.0si M. 5187 EWT White