parts
) of your XM collection, or perhaps searching for those elusive headlight washer covers? This is the place to do it.-
Dieselman
- Global Moderator
- Posts: 14436
- Joined: Thu Jun 18, 2009 6:44 pm
Re: parts
Where are you located?
I know of a 2.5 being scrapped in E mids.
I know of a 2.5 being scrapped in E mids.
91 3.0 sei M. 4852 EXY Black
92 2.1 sed M. 5740 ECZ Sable Phenicien
92 3.0 V6-24. 5713 EXY Black
92 2.1 sd M. 5685 ENT Blue Sideral
Prev
90 2.1sd M. 5049 EJV Mandarin
92 2.1sd A. 5698 EJV Mandarin
94 2.1sd A. 6218 ERT Triton
91 2.0si M. 5187 EWT White
92 2.1 sed M. 5740 ECZ Sable Phenicien
92 3.0 V6-24. 5713 EXY Black
92 2.1 sd M. 5685 ENT Blue Sideral
Prev
90 2.1sd M. 5049 EJV Mandarin
92 2.1sd A. 5698 EJV Mandarin
94 2.1sd A. 6218 ERT Triton
91 2.0si M. 5187 EWT White
-
xmexclusive
- Global Moderator
- Posts: 5925
- Joined: Wed Apr 15, 2009 8:11 am
Re: parts
Be sure this work is needed.
There is no bottom engine mount on a 2.5TD.
Top and bottom ones are very soft rubber buffer stops.
They allow the engine to rotate back and forth 40 to 50mm either way.
Much more movement than a normal engine.
Exhaust has a flexy section for the extra movement.
There are just two axial engine mounts either end on the centre of gravity of the engine and box.
The top and bottom buffers are routinely replaced without need because the engine suspension method is not understood.
John
There is no bottom engine mount on a 2.5TD.
Top and bottom ones are very soft rubber buffer stops.
They allow the engine to rotate back and forth 40 to 50mm either way.
Much more movement than a normal engine.
Exhaust has a flexy section for the extra movement.
There are just two axial engine mounts either end on the centre of gravity of the engine and box.
The top and bottom buffers are routinely replaced without need because the engine suspension method is not understood.
John
-
xmexclusive
- Global Moderator
- Posts: 5925
- Joined: Wed Apr 15, 2009 8:11 am
Re: parts
Water header tanks for 2.5 TD were available new from Citroen a couple of years ago.
If obtaining S/H one then check that the red internals are still good and complete.
These bits control internal water flow direction and also mark fill level.
John
If obtaining S/H one then check that the red internals are still good and complete.
These bits control internal water flow direction and also mark fill level.
John
-
Dieselman
- Global Moderator
- Posts: 14436
- Joined: Thu Jun 18, 2009 6:44 pm
Re: parts
Good to hear.
91 3.0 sei M. 4852 EXY Black
92 2.1 sed M. 5740 ECZ Sable Phenicien
92 3.0 V6-24. 5713 EXY Black
92 2.1 sd M. 5685 ENT Blue Sideral
Prev
90 2.1sd M. 5049 EJV Mandarin
92 2.1sd A. 5698 EJV Mandarin
94 2.1sd A. 6218 ERT Triton
91 2.0si M. 5187 EWT White
92 2.1 sed M. 5740 ECZ Sable Phenicien
92 3.0 V6-24. 5713 EXY Black
92 2.1 sd M. 5685 ENT Blue Sideral
Prev
90 2.1sd M. 5049 EJV Mandarin
92 2.1sd A. 5698 EJV Mandarin
94 2.1sd A. 6218 ERT Triton
91 2.0si M. 5187 EWT White
-
beckyrachel
- Can find the S1 radio
- Posts: 14
- Joined: Fri Oct 09, 2009 5:46 pm
Re: parts
Anyone got a number for Greg Bibby - I need 2.5TD parts.