WTD - series 1.5 bits

Post by **russ92xmsed** » Tue Aug 21, 2012 8:42 pm

Hi Vince,
You can buy new dipsticks from Guy Perry...go to peugeotcarparts.net. part number 117404. It cost £8.98 delivered.
I bought one and it is great. But they are a tight fit to begin with.
Russ

MTXM · Post by **MTXM** » Wed Aug 22, 2012 9:35 am

Hi Vince,
It was good to meet you and your car at ICCCR and let me know if there are any other bits needed as I might be able to help!
With regards,
Matthew T.

Post by **citroenxm** » Wed Aug 22, 2012 9:45 am

You were at iccr vince!!! how did i miss you or was it a sunday only visit??

MTXM · Post by **MTXM** » Wed Aug 22, 2012 11:58 am

Yes Paul it was on the Sunday! Regards, Matthew T.

andmcit · Post by **andmcit** » Wed Aug 22, 2012 2:14 pm

Hi Vince.

I'm right out of time and have weighed in my first complete s1 Xm this morning
- drove it onto the weighbridge.

What are you still after as there's only one car with the same seats as yours so
it's very rare out of 6 J, K, L reg low/mid spec cars. Am I keeping anything off
the next car to go in tomorrow morning!? Please let me know if there's parts
you haven't sourced off anyone else as I have these 6 cars to weigh in!

Not happy about it all and it's breaking my heart doing this.

Andrew

Post by **citroenxm** » Wed Aug 22, 2012 6:28 pm

Hope your keeping two for me Andrew... rather then Tin cans!

andmcit · Post by **andmcit** » Wed Aug 22, 2012 7:04 pm

I feel sick in the pit of my stomach doing this - the car started first turn and lifted up to high to drive off the trailer. I know it's only metal and just a machine but I DO get sentimental about these kind of things.

To add insult to injury ice decided the next one is too good to weigh in as it's all mechanically sound but getting it outside in some sunlight
now realise it could have used the same coloured door swapped off the earlier Mauritius blue car as its all a bit wobbly on the door skin! Damn!!

Seriously Paul, you're going to have to say what you specifically want as they're going imminently.

There's a:

smart gold H plate 2.0i manual base spec - 84k miles - complete but with a damaged OSR wing outer skin - low reverse damage
Burgundy G plate 2.0i manual base spec - 151k miles - complete - needs repair with 2" mig patch to middie outer of each sill
Burgundy G plate 2.1 SD manual - 214k miles - lacquer achne on upper surfaces and clutch correctly fitting

These are going complete in the next 2 days

Post by **citroenxm** » Wed Aug 22, 2012 7:20 pm

I cant act in a matter of two days...

theres too much going on up here unfortunally...

what im really after is a manual tct si or sei...

Post by **Dieselman** » Wed Aug 22, 2012 7:46 pm

Do you have any original radio's in these cars, going spare?

andmcit · Post by **andmcit** » Wed Aug 22, 2012 9:08 pm

I never checked the radio on the car that weighed in today! Do'h!'
I'll check the others in the morning. Paul, the parky stripped TCT
got weighed in a short while back with pretty much all the bodywork
and mechanicals barr the easy stuff in he engine bay as I had to
move it on. If it has to be a TCT I can't help you. Plenty of early
s1 stuff though on G and H plate.

Citroen XM Forum

WTD - series 1.5 bits

Re: WTD - series 1.5 bits

Re: WTD - series 1.5 bits

Re: WTD - series 1.5 bits

Re: WTD - series 1.5 bits

Re: WTD - series 1.5 bits

Re: WTD - series 1.5 bits

Re: WTD - series 1.5 bits

Re: WTD - series 1.5 bits

Re: WTD - series 1.5 bits

Re: WTD - series 1.5 bits