S2 V6 parts

Selling off one (or bits :o) of your XM collection, or perhaps searching for those elusive headlight washer covers? This is the place to do it.
marc61
Citrobics expert
Posts: 597
Joined: Sat May 02, 2009 8:17 pm
Location: Stamford

S2 V6 parts

Post by marc61 » Sun Nov 08, 2020 1:13 pm

Hi

I’ve decided to scrap my car, after nearly 10 years of enjoyable motoring. It’s just failed the MOT on bad rust to the sills and a big hole in the structure near the fuel tank and offside rear jacking point. I’ll be stripping it of useful stuff, so if there’s any S2 stuff you’re looking for just le me know.

Car is top of range W reg 3 litre but with 5 speed manual box. Silver, black leather, early S1 alloys, S1 window motors etc.

Cheers

Marc
1987 CX GTi Turbo 2, RHD, Maikonics, Quaife LSD, Cassis Nacre
1972 SM 2.7 carb, Star Garnet Metallic
1972 DS 21EFI, LHD, SM steering, hydractive, Gris Espadon
About 8 XMs, now all deceased

xantia_v6
XM Guru
Posts: 1656
Joined: Sun Mar 31, 2013 5:09 pm
Location: Christchurch, New Zealand or Beaune, France

Re: S2 V6 parts

Post by xantia_v6 » Sun Nov 08, 2020 5:31 pm

I would like a pair of front side lights, and (if in good condition) a silver rear bumper. The complication is that my XM is in France but I am currently in New Zealand, and there is no prospect of an early return to the northern hemisphere.

Just remembered, I would also like spares of the 2 flexible hydraulic pipes that run from the engine to the subframe.
1999 XM Exclusive V6 24V ES9 Manual (LHD) 105,000 km
1997 Xantia Exclusive V6 (RHD) 45,000 miles

David Hallworth
Citrobics expert
Posts: 543
Joined: Wed Apr 15, 2009 10:00 am

Re: S2 V6 parts

Post by David Hallworth » Sun Nov 08, 2020 9:32 pm

Hi Marc,

How much do you want for the engine, gearbox, wiring loom, radiator, top hose, bottom hose, mounts and drive shafts?

Thanks,
David.
'98 Xantia Activa V6 :-D
'00 XM V6 Exclusive
'12 C6 3.0 HDi Exclusive
'15 C4 BlueHDi Feel

citroenxm
Global Moderator
Posts: 9981
Joined: Wed Apr 15, 2009 9:11 am
Location: North Wales - FAR far far away!!! :-p

Re: S2 V6 parts

Post by citroenxm » Sun Nov 08, 2020 9:37 pm

Awwww what a shame to read this Marc after all the work we put in to convert to manual.. is she really not worth patching up.

It was a learning curve converting though I must say..
Projects:(eventually if theres any bodywork left)
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual

Others
In use.. 1995 M reg S2 2.1td auto exclusive

marc61
Citrobics expert
Posts: 597
Joined: Sat May 02, 2009 8:17 pm
Location: Stamford

Re: S2 V6 parts

Post by marc61 » Mon Nov 09, 2020 4:03 pm

PMs sent

Agree it’s a shame Paul, but the rust is pretty bad, it’s rusted from the inside out so the tank needs to be taken out and the sill/floor cut out which is a bit too major for me.

Cheers

Marc
1987 CX GTi Turbo 2, RHD, Maikonics, Quaife LSD, Cassis Nacre
1972 SM 2.7 carb, Star Garnet Metallic
1972 DS 21EFI, LHD, SM steering, hydractive, Gris Espadon
About 8 XMs, now all deceased

Rommel
Has changed a sphere or two
Posts: 335
Joined: Mon Nov 28, 2011 11:36 am

Re: S2 V6 parts

Post by Rommel » Tue Nov 10, 2020 9:38 am

Very interested in the Hydractive ecu Marc.

Also what shape are the front struts and tops in?
Rohan
ES9 V6
Previous:
2.1TD Exclusive Orga 6668
2.5TD VSX Estate

marc61
Citrobics expert
Posts: 597
Joined: Sat May 02, 2009 8:17 pm
Location: Stamford

Re: S2 V6 parts

Post by marc61 » Tue Nov 10, 2020 9:33 pm

Not sure about the struts, they look ok but I’ll take them off and find out.

PM sent
1987 CX GTi Turbo 2, RHD, Maikonics, Quaife LSD, Cassis Nacre
1972 SM 2.7 carb, Star Garnet Metallic
1972 DS 21EFI, LHD, SM steering, hydractive, Gris Espadon
About 8 XMs, now all deceased

User avatar
Eddie nuff
Could do a 2.1 headgasket
Posts: 1227
Joined: Mon Feb 25, 2013 7:53 pm
Location: West Yorkshire

Post by Eddie nuff » Sat Nov 14, 2020 8:36 pm

On the understanding that these would transfer from S2 to S1:-

Front subframe, as the one on the 24v is rust with a bit of metal attached to it. Goes without saying that it must be solid as it will be sandblasted before fitting.

13th window and fittings

Sound deadening on the engine bay firewall

Front wheel arches

Picture of the alloys?

Does this car have a sunroof?
89 XM 2.0Si RP4788 (Gold)

citroenxm
Global Moderator
Posts: 9981
Joined: Wed Apr 15, 2009 9:11 am
Location: North Wales - FAR far far away!!! :-p

Re: S2 V6 parts

Post by citroenxm » Sat Nov 14, 2020 9:33 pm

The esj subframe is different to S1 in a couple of places

Alloys same as yours..

I've got 13th windows...I think. Well did have..

I've archs set aside for you too..
Projects:(eventually if theres any bodywork left)
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual

Others
In use.. 1995 M reg S2 2.1td auto exclusive

User avatar
Eddie nuff
Could do a 2.1 headgasket
Posts: 1227
Joined: Mon Feb 25, 2013 7:53 pm
Location: West Yorkshire

Post by Eddie nuff » Sat Nov 14, 2020 9:51 pm

Ahh right, that's fair enough.

Need a good quality front subframe folks. Must be solid.
89 XM 2.0Si RP4788 (Gold)

Post Reply