Citroen XM Forum

UK OWNERS.. Mk.1 or Y3 as we have come to know them as.

This.1994 2.1td needs scavenging for last minute parts...

1. Engine and box is spoken for.
2. Little remains other then a decent pair of h2 electro valves. Its a twin electrovalve suspension setup..
3. Doors, boot lid available..
Theres little left inside after it was going to be a project which now cannot be done.

YOU WILL need to come to me for large items. If I can get someone to remove smaller items I'll post at my time..

Whats left when the time has come will all go as what remains..

I need serious enquiries only on this and not .. maybe this maybe that .. nothing expensive either..

Pm for location please some of you know I'm slightly out the way for you.

The car is featured on here under members cars but best taken from here....

Hi Paul,

Any AC bits on that?

No.. but I do have some ac bits available for td cars..

What bits do you have?

A full setup .. other then then front rad.. I've even a spare heater.box evaporator.

So.. the easy stuff which you can get off ebay still.. compressor and ac rad. So I've.not bothered about those. But pipe work, from compressor to dryer to ac rad and from the in car evaporator to the dryer. So basicly all the connecting pipe work..

is that r12 or r134? And how much for the lot.

R134a stuff.. I dint bother with r12 stuff..

What's the driver side suspension cap like, can't think what they are called at the moment, go right at the top of the suspension

Sadly, Paul (citroenxm) died on the 11th April - viewtopic.php?f=12&t=10805

His funeral will be on the 9th May.

Thanks for letting me know, RIP Paul