Page 1 of 1

Wanted: White runner for mk2 window

Posted: Tue Nov 02, 2010 8:58 am
by SteveLP
Window failed again but this time not the cable...
The white plastic runner that holds the window up and that the window cable slots into. It has cracked where cable end sits.
It is for a mk2 drivers door. I think it is a generic part so any mk2 door should supply one.

Is there a spare available from Citroen still?

Cheers.
Steve

Re: Wanted: White runner for mk2 window

Posted: Tue Nov 02, 2010 9:05 pm
by Dieselman
They are still available from Citroen dealers and AEP.

Re: Wanted: White runner for mk2 window

Posted: Tue Nov 23, 2010 11:48 am
by SteveLP
Dieselman wrote:They are still available from Citroen dealers and AEP.
Unfortunately while the MK1 is available as a spare part, the MK2 version is not!
Citroen madness again.
So my plea for this window part is still ongoing!!
Hint hint

Re: Wanted: White runner for mk2 window

Posted: Tue Nov 23, 2010 6:40 pm
by robert_e_smart
Hi Steve,

I'll have a rummage, I have a drivers window regulator that I am using for spares at the moment. You'll have to release the cable a bit from the winder wheel to get enough slack to get the ends into the slider. Depending on the cable condition, it may be a good time to change them.