S1 Lock door lock buttons and Glove box lid catch

zaphod · Post by **zaphod** » Sun May 08, 2011 11:18 pm

Still on my quest for a full S1 interior. I have collected the interior from 'Battlescar' however it seems the door lock buttons were never fitted, these being the bits that slide up and down in the door when the car is locked or unlocked. The S2 versions ahve a differnt profile unfortunatly.

I also need the infamous glove box lid catch that has a depressing tendancy to break (yes it broke, long before I saw the dash!) so I also need that!

Post by **xmexclusive** » Mon May 09, 2011 7:14 am

Hi Zaphod

A while ago AEP had some new Mk1 glove box lid catches as a complete assembly.
Might be worth a call. Bit under £20 from memory.
Will see if I can find any Mk1 lock buttons in the junk boxes.
Know I tend to save them along with the Mk1 door catch plastic surrounds.
May take a while to come across anything with my storage system.

John

Geoff Lebowski · Post by **Geoff Lebowski** » Mon May 09, 2011 8:25 am

Sounds like a similar storage system to mine John!

Sorry about that Zaphod - i didn't realise they were different. Not the same as early Xantia ones per chance?

Post by **robert_e_smart** » Mon May 09, 2011 10:34 am

Series 2 Xm buttons are the same as Xantia front door lock buttons.

zaphod · Post by **zaphod** » Mon May 09, 2011 12:21 pm

Geoff Lebowski wrote:Sounds like a similar storage system to mine John!

Sorry about that Zaphod - i didn't realise they were different. Not the same as early Xantia ones per chance?

No worries! The leather itself is actually better than expected as is the wood on the doors

Geoff Lebowski · Post by **Geoff Lebowski** » Mon May 09, 2011 3:35 pm

Glad you're pleased!

messerschmitt owner · Post by **messerschmitt owner** » Wed May 11, 2011 11:05 am

Zaphod

oi! come and clear my garage of dash bits - lol

Post by **citroenxm** » Thu May 12, 2011 9:31 am

Im getting extreamilly confused here Stewart..

Are you want SERIES 1 stuff or SERIES 2 stuff?????

Not that I can help you much with a dash, or much S1 stuff having two that i AM going to keep..

Paul

Post by **xmexclusive** » Thu May 12, 2011 11:39 am

Zaphod is putting a full Mk1 dash and trim into a Mk2.
Making up little converter leads to fit Mk1 controls and switches into the existing Mk2 wiring plugs.
To me it seems a very sensible and practical way to achieve what he wants.

John

Post by **citroenxm** » Thu May 12, 2011 11:42 am

Ah right thanks John.... I see now.. Yes, the connector leads are a good idea... I was a bit confused as He's picked up a S2 leather set.. thats all, but I guess S1 or S2 leather - it dont matter other then the S1.5 HARD leather...

Paul

Citroen XM Forum

S1 Lock door lock buttons and Glove box lid catch

S1 Lock door lock buttons and Glove box lid catch

Re: S1 Lock door lock buttons and Glove box lid catch

Re: S1 Lock door lock buttons and Glove box lid catch

Re: S1 Lock door lock buttons and Glove box lid catch

Re: S1 Lock door lock buttons and Glove box lid catch

Re: S1 Lock door lock buttons and Glove box lid catch

Re: S1 Lock door lock buttons and Glove box lid catch

Re: S1 Lock door lock buttons and Glove box lid catch

Re: S1 Lock door lock buttons and Glove box lid catch

Re: S1 Lock door lock buttons and Glove box lid catch