Automatic gearbox - fitted to the 2.1 XUD, NOT the 2.5 (different bolt pattern I'm told) Drove onto and off of a trailer, so works. Comes with kickdown cable, and the electrical connector thingie (including the other half of the connector, and about half a foot of extra loom). Does not include the flywheel sensor






Obviously, collection only, as it still has some oil inside it, and it weighs an absolute ton! £50
Torque convertor, again, known to be good

Once again, collection only, as it's 100% impossible to fully drain these of oil £15
Flexplate/shims/etc, for above torque convertor, for 2.1 XUD


P+P may be possible - but be aware the edges of the teeth are literally razor sharp (sliced a few chunks out of my fingers when I put it down!) so I can't gaurantee it'd turn up intact... which is a PITA: £8
Or, for the gearbox, torque convetor, AND flexplate: £65
Hydraulic pump's also up for grabs

£10 collected - or £16 posted
Now a part that's rarely ever fully working - but this one is!


and even a little vieo to show no dead lines or pixels!

As you lot know, there'sa bloke currently selling these for for £200 on fleabay as NOS, so asking for £50 for a quick sale, or £53 posted
Also selling the idiot light cluster


£10 posted
Front seats - electric forwards/backwards, tilt, and on the drivers seat, up and down.

The driver seat cusion has unclipped itself, possibly just the springs losing tension due to age - easily permanently cureable with a couple of strategic cable ties! (or are they all like this??) £30 Collection only
Hydractive ECU, comes with a chunk of loom too


£10 posted