Window regulator needed.

[mds141]

Does anyone have a NOS or good used OSF ie drivers front window regulator? It's the later nine pin electrical connector. No luck at local Citroen dealer. Cheers in advance.

[citroenxm]

Seems to be a que for these now..

I need one for a 2000 XM .. You need one and theres another member wanting a 2000 regulator too!!

[citroenxm]

I think mark has sourced one now according to Facebook

Im still after one though..

[xmexclusive]

There are two versions of the window winder 9 pin connector used on Mk2 XM's.
Early Mk2's use a Citroen thin spring clip lock, later ones use a Pug red slide lock.
Electrical connection pins are identical for both.
Polarisation slots and ridges are varied to prevent interchange.
If a problem this is usually bodged but it destroys the locking on a plug hanging under the motor.
It is possible to swap the cases but that involves striping and rebuilding the control motor.

John

[Dieselman]

I would think the same assembly is fitted to a number of Peugeot / Citroen cars.

[MTXM]

Im still after one though..

If you can wait until next month Paul I believe both Dave's doors have working regulators! Regards, Matthew T.

[mds141]

I've managed to source a s/h one off a fellow Citroenista. Cheers guys. Don't get much of a chance to frequent the forums these days sadly. With losing Mum last year I'm busy being Dad's carer.

[White Exec]

Take care of yourself, Mark. Know that kind of responsibility.
Enjoyed your regular posts.

[MTXM]

It is good to see you on the Forum again Mark and hopefully we may meet at the National this year! Regards, Matthew T.

[Southerneruk]

I know how you feel mark, i am the same but the other way round looking after my mum which is a 24 hour job and no rest bites