Hi All,
Just removed and about to repair my rear driver's side window mechanism with snapped cable, and found the plastic runner (that fits into the window hole) must have slid off somewhere, and I can't find it anywhere.
Does anyone have a plastic runner and c-clip spare or worse case, an entire spare assembly from which I can take one?
It's a 1998 car, but I don't think it matters if it's from a Mk1.
Thanks,
Lee
Window motor assembly runner
-
- Has changed a sphere or two
- Posts: 251
- Joined: Thu Mar 01, 2018 11:50 am
Window motor assembly runner
Citroen XM 2.1TD 1994 Mk2 - M21 CXM
-
- Global Moderator
- Posts: 9987
- Joined: Wed Apr 15, 2009 9:11 am
- Location: North Wales - FAR far far away!!! :-p
Re: Window motor assembly runner
The plug will be different but I'm sure S2 rears are similar. You may need to cut yur plug off your plug and solder one in .. I can supply winder and a plug complete with some wire to solder in
Projects:(eventually if theres any bodywork left)
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual
Others
In use.. 1995 M reg S2 2.1td auto exclusive
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual
Others
In use.. 1995 M reg S2 2.1td auto exclusive
-
- Global Moderator
- Posts: 5925
- Joined: Wed Apr 15, 2009 8:11 am
Re: Window motor assembly runner
I think the top rails and plastic runners are different between series 1 & 2 winders.
Just the runner with its stud is different, the matching push on plastic fan and clip are common.
That means you can swap complete assemblies but only repair with correct type bits.
Electrical plugs are common to both.
Just the runner with its stud is different, the matching push on plastic fan and clip are common.
That means you can swap complete assemblies but only repair with correct type bits.
Electrical plugs are common to both.
-
- Has changed a sphere or two
- Posts: 251
- Joined: Thu Mar 01, 2018 11:50 am
Re: Window motor assembly runner
Thanks both for the responses - problem is I never consciously looked at the plastic runner, so I can't describe it.
Perhaps I should hold out for someone who has a Mk1 or Mk2 version complete, if they both fit?
This is really annoying, I have the repair kit for mine, but without the white plastic part, it's useless.
Perhaps I should hold out for someone who has a Mk1 or Mk2 version complete, if they both fit?
This is really annoying, I have the repair kit for mine, but without the white plastic part, it's useless.
Citroen XM 2.1TD 1994 Mk2 - M21 CXM
-
- Global Moderator
- Posts: 9987
- Joined: Wed Apr 15, 2009 9:11 am
- Location: North Wales - FAR far far away!!! :-p
Re: Window motor assembly runner
I have some. ive some doors to strip down..
Projects:(eventually if theres any bodywork left)
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual
Others
In use.. 1995 M reg S2 2.1td auto exclusive
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual
Others
In use.. 1995 M reg S2 2.1td auto exclusive
-
- Has changed a sphere or two
- Posts: 251
- Joined: Thu Mar 01, 2018 11:50 am
Re: Window motor assembly runner
If you can help, eternal gratitude!
Citroen XM 2.1TD 1994 Mk2 - M21 CXM