Page 1 of 1
Thermostat Gasket 1339.66
Posted: Fri Nov 22, 2019 3:34 pm
by paulstringer
I've gone and purchased the wrong gasket for my thermostat. It's part 1339.66 PSA original I think its for 2.1L diesels.
Let me know if you can make use of it otherwise it's going to go to waste.
Paul
Re: Thermostat Gasket 1339.66
Posted: Mon Nov 25, 2019 11:06 am
by Peter.N.
In the event of unobtainable gaskets I run a bead of silicone sealant around one face and leave it overnight to cure, you then have a nice semi flexible seal.
Peter
Re: Thermostat Gasket 1339.66
Posted: Tue Nov 26, 2019 9:21 am
by paulstringer
i actually have some of the Granville’s stuff but Lucky enough to find the correct gasket on eBay for a few quid. Good to know there’s an alternative.
Re: Thermostat Gasket 1339.66
Posted: Wed Nov 27, 2019 9:10 pm
by sageman
I make a gasket out of a rubbery gasket material you can buy in sheets on eBay if they can’t be bought
Re: Thermostat Gasket 1339.66
Posted: Wed Nov 27, 2019 9:52 pm
by White Exec
Liquid gasket seal (I think it's a polyurethane adhesive) available. Soecified item for Toyota steel engine sump to alu block.
There is also Viton sheet material on Amazon, eg 300x300x1mm, which can be cut to size.