Page 2 of 4
Re: Breaking 1995 2.1 TD Manual Hatch
Posted: Mon Oct 31, 2011 6:16 pm
by robert_e_smart
Re: Breaking 1995 2.1 TD Manual Hatch
Posted: Tue Nov 01, 2011 10:24 am
by Ciaran
Re: Breaking 1995 2.1 TD Manual Hatch
Posted: Tue Nov 01, 2011 10:26 am
by Ciaran
Actually Rob, could you save me the little plastic cam / connector from the boot-lock linkage if its still present? I just remembered something...
Re: Breaking 1995 2.1 TD Manual Hatch
Posted: Tue Nov 01, 2011 4:49 pm
by bobhowes
Hi Could do with a rear suspension cylinder badly, but expect too difficult to get off. heres hopeing, Bob Howes/
Re: Breaking 1995 2.1 TD Manual Hatch
Posted: Tue Nov 01, 2011 4:51 pm
by bobhowes
Hi again Just relised wont fit my estate b*** Bob.
Re: Breaking 1995 2.1 TD Manual Hatch
Posted: Tue Nov 01, 2011 5:16 pm
by Dean
Do me a favour Robert, pull all of the plastic bungs out from the chassis rails, as many as you can please, also have a go at levering off those little roof trims above the rear quarterlights.
Let me know what the damage is when its posted.
D
Re: Breaking 1995 2.1 TD Manual Hatch
Posted: Tue Nov 01, 2011 5:27 pm
by davetherave
Is the steering ram available?
Re: Breaking 1995 2.1 TD Manual Hatch
Posted: Tue Nov 01, 2011 5:39 pm
by robert_e_smart
Dave,
There was a leak from the steering assembly, not sure if it was the ram or pinion valve. But both are still there.
I also have a CX rear subframe if you are interested in that.
Dean,
I'll try and get as many of those bungs as I can.
Bob,
I might have some estates ones, I shall check and report back.
Ciaran,
I'll have a look.
Re: Breaking 1995 2.1 TD Manual Hatch
Posted: Tue Nov 01, 2011 8:20 pm
by Dieselman
Bob.
I know where there is an estate being broken. Someone had a go at removing the rear rams but couldn't, but if a real problem just drop the whole subframe and pull them off afterwards.
If interested let me know and I'll send you their number.
Re: Breaking 1995 2.1 TD Manual Hatch
Posted: Thu Nov 03, 2011 5:40 pm
by bobhowes
Ciaran am very interested, if you can find them please let me know, Bob.