Page 2 of 4

Re: Breaking 1995 2.1 TD Manual Hatch

Posted: Mon Oct 31, 2011 6:16 pm
by robert_e_smart
Here are some pics of progress on Saturday afternoon. If it is dry tomorrow, I will finish off by lifting the back up and stripping anything of worth from the rear suspension.

Image

Image

Image

Re: Breaking 1995 2.1 TD Manual Hatch

Posted: Tue Nov 01, 2011 10:24 am
by Ciaran
Ouch! :o

:lol:

You done a good thorough job on it, waste not want not :D

:)

Re: Breaking 1995 2.1 TD Manual Hatch

Posted: Tue Nov 01, 2011 10:26 am
by Ciaran
Actually Rob, could you save me the little plastic cam / connector from the boot-lock linkage if its still present? I just remembered something...

Re: Breaking 1995 2.1 TD Manual Hatch

Posted: Tue Nov 01, 2011 4:49 pm
by bobhowes
Hi Could do with a rear suspension cylinder badly, but expect too difficult to get off. heres hopeing, Bob Howes/

Re: Breaking 1995 2.1 TD Manual Hatch

Posted: Tue Nov 01, 2011 4:51 pm
by bobhowes
Hi again Just relised wont fit my estate b*** Bob.

Re: Breaking 1995 2.1 TD Manual Hatch

Posted: Tue Nov 01, 2011 5:16 pm
by Dean
Do me a favour Robert, pull all of the plastic bungs out from the chassis rails, as many as you can please, also have a go at levering off those little roof trims above the rear quarterlights.

Let me know what the damage is when its posted.

D

Re: Breaking 1995 2.1 TD Manual Hatch

Posted: Tue Nov 01, 2011 5:27 pm
by davetherave
Is the steering ram available?

Re: Breaking 1995 2.1 TD Manual Hatch

Posted: Tue Nov 01, 2011 5:39 pm
by robert_e_smart
Dave,

There was a leak from the steering assembly, not sure if it was the ram or pinion valve. But both are still there.

I also have a CX rear subframe if you are interested in that.

Dean,

I'll try and get as many of those bungs as I can.

Bob,

I might have some estates ones, I shall check and report back.

Ciaran,

I'll have a look.

Re: Breaking 1995 2.1 TD Manual Hatch

Posted: Tue Nov 01, 2011 8:20 pm
by Dieselman
Bob.
I know where there is an estate being broken. Someone had a go at removing the rear rams but couldn't, but if a real problem just drop the whole subframe and pull them off afterwards.

If interested let me know and I'll send you their number.

Re: Breaking 1995 2.1 TD Manual Hatch

Posted: Thu Nov 03, 2011 5:40 pm
by bobhowes
Ciaran am very interested, if you can find them please let me know, Bob.