Breaking S1 2.1SD

Spotted an XM (or bits of one :() at the scrapyard? Post in here.
Dieselman
Global Moderator
Posts: 13734
Joined: Thu Jun 18, 2009 6:44 pm

Re: Breaking S1 2.1SD

Post by Dieselman » Thu Nov 10, 2011 11:40 pm

I did that but found the outer two nuts seized due to water ingress into the crossmember. The subframe bolts undo OK but I'll have the rubber bearers off as well as iirc they are no longer available from Citroen.
92 2.1SED M.RP5740 ECZ Sable Phenicien
92 3.0 V6-24.Rp 5713 EXY Black
92 2.1SD M.RP 5685 ENT Blue Sideral
Prev
90 2.1SD M.RP 5049 EJV Mandarin
92 2.1SD A.RP 5698 EJV Mandarin
94 2.1SD A.RP 6218 ERT Triton Green
91 2.0SI M.RP 5187 EWT White

robert_e_smart
Global Moderator
Posts: 4546
Joined: Thu Apr 16, 2009 1:08 pm

Re: Breaking S1 2.1SD

Post by robert_e_smart » Thu Nov 10, 2011 11:52 pm

I'll have the rubber bearers off as well as iirc they are no longer available from Citroen.
They are listed on the S2 screen:

0000513175 JOINT SET 155,81 GBP 186,97 GBP 186,97 GBP

At this price I would hope that is a complete set for the whole rear subframe, with both pairs of front and rear mounts.
1990 XM 2.1 Turbo SD
2008 Volvo V70 D5 SE Lux Automatic
2009 Volvo XC90 D5 SE Automatic

vive la difference
Knows how to use the parking brake
Posts: 59
Joined: Tue Oct 04, 2011 7:35 pm
Location: AVON DASSETT NR BANBURY

Re: Breaking S1 2.1SD

Post by vive la difference » Fri Nov 11, 2011 7:35 am

Hi Everyone

I just thought i would add to this thread that i have just completely dismantled a S1 TD12V (LHD) MANUEL all parts now stored under cover in my barn Parts can be shipped to the UK as i have a friend travelling across on a weekly basis, or you could take a short break and collect! Bring your XM back to the land of its birth!

regards Brian
citroen xm S1 v6
Range Rover P38 4.6 HSE
Alfa Romeo 147

Dieselman
Global Moderator
Posts: 13734
Joined: Thu Jun 18, 2009 6:44 pm

Re: Breaking S1 2.1SD

Post by Dieselman » Wed Nov 16, 2011 9:37 am

How do you get the auto gear selector handle off, it won't come off even after removing the screw low down.
92 2.1SED M.RP5740 ECZ Sable Phenicien
92 3.0 V6-24.Rp 5713 EXY Black
92 2.1SD M.RP 5685 ENT Blue Sideral
Prev
90 2.1SD M.RP 5049 EJV Mandarin
92 2.1SD A.RP 5698 EJV Mandarin
94 2.1SD A.RP 6218 ERT Triton Green
91 2.0SI M.RP 5187 EWT White

citroenxm
Global Moderator
Posts: 9981
Joined: Wed Apr 15, 2009 9:11 am
Location: North Wales - FAR far far away!!! :-p

Re: Breaking S1 2.1SD

Post by citroenxm » Wed Nov 16, 2011 9:57 am

Drop the whole remote housing off will four ten mm nuts under the sound proof rubber surround auto selector cables do sieze up.. So keep it complete and drop it down....

Paul
Projects:(eventually if theres any bodywork left)
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual

Others
In use.. 1995 M reg S2 2.1td auto exclusive

Dieselman
Global Moderator
Posts: 13734
Joined: Thu Jun 18, 2009 6:44 pm

Re: Breaking S1 2.1SD

Post by Dieselman » Wed Nov 16, 2011 9:58 am

I'm definitely having it off the car, just thought I needed the handle off first.

In case you didn't see my comment in Matthews thread, this car is rotten all the way, removed the ECU box yesterday to find the inner wing right through and the bumper support and wing tab to be none existent.
Last edited by Dieselman on Wed Nov 16, 2011 10:01 am, edited 1 time in total.
92 2.1SED M.RP5740 ECZ Sable Phenicien
92 3.0 V6-24.Rp 5713 EXY Black
92 2.1SD M.RP 5685 ENT Blue Sideral
Prev
90 2.1SD M.RP 5049 EJV Mandarin
92 2.1SD A.RP 5698 EJV Mandarin
94 2.1SD A.RP 6218 ERT Triton Green
91 2.0SI M.RP 5187 EWT White

citroenxm
Global Moderator
Posts: 9981
Joined: Wed Apr 15, 2009 9:11 am
Location: North Wales - FAR far far away!!! :-p

Re: Breaking S1 2.1SD

Post by citroenxm » Wed Nov 16, 2011 10:00 am

Nope it can stay complete....

Paul
Projects:(eventually if theres any bodywork left)
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual

Others
In use.. 1995 M reg S2 2.1td auto exclusive

robert_e_smart
Global Moderator
Posts: 4546
Joined: Thu Apr 16, 2009 1:08 pm

Re: Breaking S1 2.1SD

Post by robert_e_smart » Wed Nov 16, 2011 10:08 am

If you do want to remove the selector top, you need to push the button in and rotate it anti-clockwise I think, and it will lift up off. It will avoid it getting damaged in storage, or when you are removing the whole lot from the car.
1990 XM 2.1 Turbo SD
2008 Volvo V70 D5 SE Lux Automatic
2009 Volvo XC90 D5 SE Automatic

Dieselman
Global Moderator
Posts: 13734
Joined: Thu Jun 18, 2009 6:44 pm

Re: Breaking S1 2.1SD

Post by Dieselman » Wed Nov 16, 2011 5:35 pm

Thanks Robert, I'll try that.
92 2.1SED M.RP5740 ECZ Sable Phenicien
92 3.0 V6-24.Rp 5713 EXY Black
92 2.1SD M.RP 5685 ENT Blue Sideral
Prev
90 2.1SD M.RP 5049 EJV Mandarin
92 2.1SD A.RP 5698 EJV Mandarin
94 2.1SD A.RP 6218 ERT Triton Green
91 2.0SI M.RP 5187 EWT White

User avatar
Dean
Global Moderator
Posts: 6116
Joined: Wed Apr 15, 2009 7:53 am
Location: Isle of wight

Re: Breaking S1 2.1SD

Post by Dean » Wed Nov 16, 2011 7:21 pm

Yep turn it 90 degrees then press the button and lift off, dont forget there is two grub screws holding it on, one each side.

D
92 Citroen XM Prestige 3.0i Auto R.P5678
14 Mitsubishi L200 Trojan
89 Talbot Express 2.0 coach built Auto-trail Chinook

Addicted to Crackanory

Post Reply