series 1 XM 2.1 TD (grey) scraping (in kent)

Spotted an XM (or bits of one :() at the scrapyard? Post in here.
Post Reply
dkr
Can find the S1 radio
Posts: 16
Joined: Thu Apr 14, 2011 8:52 am

series 1 XM 2.1 TD (grey) scraping (in kent)

Post by dkr » Wed May 08, 2013 2:32 pm

hi

We have just got in a "g" reg citroen xm 2.1 td for scraping. It failed the M.O.T in a big way (mostly suspension leaks and rust) and is in general in too poor a condtion to put back on the road. Its got plenty of good bits and a lovely engine and box.

The car is at the workshop (medway citroen) in chatham in kent, and parts can be removed and posted.

our number is 01634 849609

or mail

remy@medwaycitroen.com

thanks
remy

dkr
Can find the S1 radio
Posts: 16
Joined: Thu Apr 14, 2011 8:52 am

Re: series 1 XM 2.1 TD (grey) scraping (in kent)

Post by dkr » Mon Oct 28, 2013 11:51 am

Hi

We still have this car, its had a few bits picked off it, but its still got most of the main parts (engine / box ect).

Just email or ring if any parts are needed

thanks
remy

normantilbury
Has changed a sphere or two
Posts: 398
Joined: Thu Apr 16, 2009 6:55 am
Location: Tilbury Essex

Re: series 1 XM 2.1 TD (grey) scraping (in kent)

Post by normantilbury » Tue Oct 29, 2013 8:02 am

hi remy,
is it a car or a estate as i'm looking for a spare wheel carrier for a estate.

norman
98 Xm Vsx 2.1 Td Silver Estate RP 7548
Located in Lindley, Huddersfield HD3 3LX

dkr
Can find the S1 radio
Posts: 16
Joined: Thu Apr 14, 2011 8:52 am

Re: series 1 XM 2.1 TD (grey) scraping (in kent)

Post by dkr » Tue Oct 29, 2013 2:11 pm

hi

sadly its a hatchback (and rusty) but if I here of any spare wheel carriers for a estate I will let you know.

thanks
remy

normantilbury
Has changed a sphere or two
Posts: 398
Joined: Thu Apr 16, 2009 6:55 am
Location: Tilbury Essex

Re: series 1 XM 2.1 TD (grey) scraping (in kent)

Post by normantilbury » Sat Nov 02, 2013 9:44 am

Ok thanks Remy.

Norman :(
98 Xm Vsx 2.1 Td Silver Estate RP 7548
Located in Lindley, Huddersfield HD3 3LX

markysimon
Has changed a sphere or two
Posts: 376
Joined: Thu May 12, 2011 5:41 pm

Re: series 1 XM 2.1 TD (grey) scraping (in kent)

Post by markysimon » Tue Nov 19, 2013 12:19 pm

Hi Remy,

D'you by any chance have the plastic mesh covers for the hydraulic pipes that run fore and aft just inside the N/S sills?

Cheers – Mark
Why don't we do it in the road?

1997 V6 24valve Exclusive
1995 XM VSX Turbo (Deceased)

Post Reply