Gasa XM 2.1 "Prestige"

The place to show off and tell us all about your XMs (or even other cars). Should it be a big project, or just some general pics, start your thread in here.
Gasa
Knows how to use the parking brake
Posts: 190
Joined: Tue Mar 03, 2020 11:39 am
Orga / RP numbers: BX 1.9 TRD

Re: Gasa XM 2.1 "Prestige"

Post by Gasa » Sat May 25, 2024 8:06 pm

...ooo, again I want to remove the entire console, I'll see if I can do that in a few days, it really annoys me that it doesn't show the temperature.

Gasa
Knows how to use the parking brake
Posts: 190
Joined: Tue Mar 03, 2020 11:39 am
Orga / RP numbers: BX 1.9 TRD

Re: Gasa XM 2.1 "Prestige"

Post by Gasa » Sat May 25, 2024 10:22 pm

..I got an electric armrest, I don't know if this is the place for the relay, and how the circuit breakers are connected, where the power is taken from.

..when I took out the armrest, there was only this from the connector, does anyone have a picture of the complete installation and how everything is connected.
1716666689862.jpg
You do not have the required permissions to view the files attached to this post.

Dieselman
Global Moderator
Posts: 14190
Joined: Thu Jun 18, 2009 6:44 pm

Re: Gasa XM 2.1 "Prestige"

Post by Dieselman » Sun May 26, 2024 8:14 am

I thought that relay socket was for rear electric windows, need to check.
The armrest is just the armrest unit , switch , wiring.

See Gabor's wiring diagrams, P100-101. viewtopic.php?f=13&t=7592&start=110#p124757
92 2.1SED M.RP5740 ECZ Sable Phenicien
92 3.0 V6-24.Rp 5713 EXY Black
92 2.1SD M.RP 5685 ENT Blue Sideral
Prev
90 2.1SD M.RP 5049 EJV Mandarin
92 2.1SD A.RP 5698 EJV Mandarin
94 2.1SD A.RP 6218 ERT Triton Green
91 2.0SI M.RP 5187 EWT White

Gasa
Knows how to use the parking brake
Posts: 190
Joined: Tue Mar 03, 2020 11:39 am
Orga / RP numbers: BX 1.9 TRD

Re: Gasa XM 2.1 "Prestige"

Post by Gasa » Mon Aug 19, 2024 4:57 pm

what could be the problem of oil appearing in this place after a long drive, EGR valve, turbo , rubbers on the valves...
1724086205927.jpg
1724086205939.jpg
You do not have the required permissions to view the files attached to this post.

Dieselman
Global Moderator
Posts: 14190
Joined: Thu Jun 18, 2009 6:44 pm

Re: Gasa XM 2.1 "Prestige"

Post by Dieselman » Tue Aug 20, 2024 6:54 am

The oil is from the engine breather system and is normal.

Check the manifold is bolted down tightly, otherwise the rubber collars are worn.
92 2.1SED M.RP5740 ECZ Sable Phenicien
92 3.0 V6-24.Rp 5713 EXY Black
92 2.1SD M.RP 5685 ENT Blue Sideral
Prev
90 2.1SD M.RP 5049 EJV Mandarin
92 2.1SD A.RP 5698 EJV Mandarin
94 2.1SD A.RP 6218 ERT Triton Green
91 2.0SI M.RP 5187 EWT White

Gasa
Knows how to use the parking brake
Posts: 190
Joined: Tue Mar 03, 2020 11:39 am
Orga / RP numbers: BX 1.9 TRD

Re: Gasa XM 2.1 "Prestige"

Post by Gasa » Tue Aug 20, 2024 5:54 pm

New rubbers are hard to find, I'll try with metal saddles to tighten everything.

Dieselman
Global Moderator
Posts: 14190
Joined: Thu Jun 18, 2009 6:44 pm

Re: Gasa XM 2.1 "Prestige"

Post by Dieselman » Wed Aug 21, 2024 6:53 am

In my experience, as long as the manifold is tightened down properly, these don't leak, even on turbo engines.

You can buy new seals, p/n 0362 55
92 2.1SED M.RP5740 ECZ Sable Phenicien
92 3.0 V6-24.Rp 5713 EXY Black
92 2.1SD M.RP 5685 ENT Blue Sideral
Prev
90 2.1SD M.RP 5049 EJV Mandarin
92 2.1SD A.RP 5698 EJV Mandarin
94 2.1SD A.RP 6218 ERT Triton Green
91 2.0SI M.RP 5187 EWT White

Gasa
Knows how to use the parking brake
Posts: 190
Joined: Tue Mar 03, 2020 11:39 am
Orga / RP numbers: BX 1.9 TRD

Re: Gasa XM 2.1 "Prestige"

Post by Gasa » Wed Aug 21, 2024 12:24 pm

I think I will solve that problem with metal saddles, I checked everything, everything is tight, it's just that the rubber bands have loosened.

Gasa
Knows how to use the parking brake
Posts: 190
Joined: Tue Mar 03, 2020 11:39 am
Orga / RP numbers: BX 1.9 TRD

Re: Gasa XM 2.1 "Prestige"

Post by Gasa » Thu Aug 29, 2024 1:56 pm

I hope I solved the problem with the rubber bands, this was the easiest and cheapest solution for me, the saddles cost 5 eu.
IMG_20240829_123306.jpg
IMG_20240829_123358.jpg
..the intake ducts are relatively clean, they have no soot deposits, probably the EGR valve has been stuck in the closed position for a long time and does not introduce soot.
IMG_20240829_123516.jpg
IMG_20240829_123814.jpg
You do not have the required permissions to view the files attached to this post.

Gasa
Knows how to use the parking brake
Posts: 190
Joined: Tue Mar 03, 2020 11:39 am
Orga / RP numbers: BX 1.9 TRD

Re: Gasa XM 2.1 "Prestige"

Post by Gasa » Thu Aug 29, 2024 2:03 pm

...and a few pictures with saddles.
IMG_20240829_130254.jpg
IMG_20240829_130313.jpg
..first I tightened everything on the engine, then on the intake manifold.
IMG_20240829_131314.jpg
IMG_20240829_131306.jpg
IMG_20240829_132713.jpg
IMG_20240829_145211.jpg
You do not have the required permissions to view the files attached to this post.

Post Reply