Page 1 of 1

How to removed front trim panel

Posted: Fri Jan 13, 2012 9:33 pm
by auto4001
Due to my xm water leaked around the bottom blower air area every time for washing or raining. So I want to removed front trim panel to check it. Please told me.

Regards,auto4001

Re: How to removed front trim panel

Posted: Fri Jan 13, 2012 9:58 pm
by xmexclusive
Hi Auto

The cross panel under the windscreen is fixed with 2 screws each side.
These screws are hidden under the triangular covers at each end of the cross panel.
The covers unclip but not easily.
Push down from the top and pull out at the bottom of the cover.
The clips are little plastic projections cast as part of the cover.
They often break off when the covers are removed.

John

Re: How to removed front trim panel

Posted: Sat Jan 14, 2012 2:34 am
by auto4001
Thank a lot John.I will try to do it.

Re: How to removed front trim panel

Posted: Sat Jan 14, 2012 12:03 pm
by Dieselman
I always unclip the end covers at the top first, then push down to unclip the bottom hooks, to avoid breakage.