Mikes V6 ES9 Manual Exclusive
-
- Global Moderator
- Posts: 13783
- Joined: Thu Jun 18, 2009 6:44 pm
Re: Mikes V6 ES9 Manual Exclusive
You will be disapointed at finding that parts of a car occupy much more space than a complete car, even when teh shell has gone.
Can't you find a space to keep the organ donor?
Can't you find a space to keep the organ donor?
92 2.1SED M.RP5740 ECZ Sable Phenicien
92 3.0 V6-24.Rp 5713 EXY Black
92 2.1SD M.RP 5685 ENT Blue Sideral
Prev
90 2.1SD M.RP 5049 EJV Mandarin
92 2.1SD A.RP 5698 EJV Mandarin
94 2.1SD A.RP 6218 ERT Triton Green
91 2.0SI M.RP 5187 EWT White
92 3.0 V6-24.Rp 5713 EXY Black
92 2.1SD M.RP 5685 ENT Blue Sideral
Prev
90 2.1SD M.RP 5049 EJV Mandarin
92 2.1SD A.RP 5698 EJV Mandarin
94 2.1SD A.RP 6218 ERT Triton Green
91 2.0SI M.RP 5187 EWT White
-
- XM Guru
- Posts: 1658
- Joined: Sun Mar 31, 2013 5:09 pm
- Location: Christchurch, New Zealand or Beaune, France
Re: Mikes V6 ES9 Manual Exclusive
I was afraid of that. I have some loft space above the garage, so anything that can be carried up a ladder will go up there, but I am not sure about doos and body panels. The engine/transmission can sit at the end of the garage for now.Dieselman wrote:You will be disapointed at finding that parts of a car occupy much more space than a complete car, even when teh shell has gone.
No, living near the centre of an old French town, I am very lucky to have a garage at all, it took 3 years to find and purchase it! There is just room in it for 2 XMs, but that leaves no working space at all. I would rather keep the good XM in the garage and have a workbench.Dieselman wrote:Can't you find a space to keep the organ donor?
1999 XM Exclusive V6 24V ES9 Manual (LHD) 105,000 km
1997 Xantia Exclusive V6 (RHD) 45,000 miles
1997 Xantia Exclusive V6 (RHD) 45,000 miles
- raynoon
- Could do a 2.1 headgasket
- Posts: 1128
- Joined: Mon Aug 31, 2015 7:38 am
- Orga / RP numbers: 6043
- Location: Merseyside
Re: Mikes V6 ES9 Manual Exclusive
Hang the doors on the walls?
1993 Citroen XM 2.1 turboSD auto
1995 Citroen XM 2.1TD Auto EXCLUSIVE
1995 Citroen XM 2.1TD Auto EXCLUSIVE
-
- XM Guru
- Posts: 1658
- Joined: Sun Mar 31, 2013 5:09 pm
- Location: Christchurch, New Zealand or Beaune, France
Re: Mikes V6 ES9 Manual Exclusive
On the subject of the parts car, I would welcome any hints for dismantling, particularly as I will be doing it in a narrow garage.
I know to slacken the spheres while the suspension is pressurised, and I will slacken the front hub nuts while there is weight on the wheels. Anything else?
I started it yesterday for the first time in 6 months, and the rattling catalytic converter has magically repaired itself and the engine sounds sweet again.
I know to slacken the spheres while the suspension is pressurised, and I will slacken the front hub nuts while there is weight on the wheels. Anything else?
I started it yesterday for the first time in 6 months, and the rattling catalytic converter has magically repaired itself and the engine sounds sweet again.
1999 XM Exclusive V6 24V ES9 Manual (LHD) 105,000 km
1997 Xantia Exclusive V6 (RHD) 45,000 miles
1997 Xantia Exclusive V6 (RHD) 45,000 miles
-
- Global Moderator
- Posts: 5925
- Joined: Wed Apr 15, 2009 8:11 am
Re: Mikes V6 ES9 Manual Exclusive
Take the doors off before you put the car in the garage to strip.
The inability to fully open a door can stop you removing the hinge pins.
The doors can be stored in the back of the car or on top to keep them out the way.
Bumpers are a similar problem for some of the bolts.
Wheels on a single slightly loosened bolt.
Do not forget to take the pins out the driveshafts and loosen the main nuts.
John
The inability to fully open a door can stop you removing the hinge pins.
The doors can be stored in the back of the car or on top to keep them out the way.
Bumpers are a similar problem for some of the bolts.
Wheels on a single slightly loosened bolt.
Do not forget to take the pins out the driveshafts and loosen the main nuts.
John
- Dean
- Global Moderator
- Posts: 6116
- Joined: Wed Apr 15, 2009 7:53 am
- Location: Isle of wight
Re: Mikes V6 ES9 Manual Exclusive
Rust can be usefull sometimesxantia_v6 wrote:I started it yesterday for the first time in 6 months, and the rattling catalytic converter has magically repaired itself and the engine sounds sweet again.
![Wink ;)](./images/smilies/icon_e_wink.gif)
D
92 Citroen XM Prestige 3.0i Auto R.P5678
14 Mitsubishi L200 Trojan
89 Talbot Express 2.0 coach built Auto-trail Chinook
Addicted to Crackanory
14 Mitsubishi L200 Trojan
89 Talbot Express 2.0 coach built Auto-trail Chinook
Addicted to Crackanory
-
- XM Guru
- Posts: 1658
- Joined: Sun Mar 31, 2013 5:09 pm
- Location: Christchurch, New Zealand or Beaune, France
Re: Mikes V6 ES9 Manual Exclusive
I have been dismantling the parts car. So far everything has come off nicely, the engine is out and the transmission separated. After a few days with greassy black hands, I am working on the interior for light relief.
I can't see how the dashboard comes out. It is loose at the bottom but seems to be held at the top, near the windscreen, but I can't see any fasteners.
I can't see how the dashboard comes out. It is loose at the bottom but seems to be held at the top, near the windscreen, but I can't see any fasteners.
1999 XM Exclusive V6 24V ES9 Manual (LHD) 105,000 km
1997 Xantia Exclusive V6 (RHD) 45,000 miles
1997 Xantia Exclusive V6 (RHD) 45,000 miles
-
- Global Moderator
- Posts: 5925
- Joined: Wed Apr 15, 2009 8:11 am
Re: Mikes V6 ES9 Manual Exclusive
If I remember rightly there are 5 bolts in the scuttle plus two at the bottom of the engine bay.
It can come out in one piece as that is how it went in.
If you are just looking to remove the cover there are Torx screws in the front vent strip.
You will need a flexi shaft on the screw driver.
John
It can come out in one piece as that is how it went in.
If you are just looking to remove the cover there are Torx screws in the front vent strip.
You will need a flexi shaft on the screw driver.
John
-
- XM Guru
- Posts: 1658
- Joined: Sun Mar 31, 2013 5:09 pm
- Location: Christchurch, New Zealand or Beaune, France
Re: Mikes V6 ES9 Manual Exclusive
I have got the XM out of hibernation, and it seems to be running well.
I spent the last couple of days doing the HA2 hydractive valve modification as per late model Xantias. It all went fairly smoothly, but I had to change the front electrovalve again because it was not switching to soft mode at all. I will open it up later and see what is going on. I will report on comfort after driving it for a bit.
While I was under the car I also swapped the flexi hose from the regulator to the subframe, as it was weeping at one of the crimps.
I spent the last couple of days doing the HA2 hydractive valve modification as per late model Xantias. It all went fairly smoothly, but I had to change the front electrovalve again because it was not switching to soft mode at all. I will open it up later and see what is going on. I will report on comfort after driving it for a bit.
While I was under the car I also swapped the flexi hose from the regulator to the subframe, as it was weeping at one of the crimps.
1999 XM Exclusive V6 24V ES9 Manual (LHD) 105,000 km
1997 Xantia Exclusive V6 (RHD) 45,000 miles
1997 Xantia Exclusive V6 (RHD) 45,000 miles
-
- Global Moderator
- Posts: 13783
- Joined: Thu Jun 18, 2009 6:44 pm
Re: Mikes V6 ES9 Manual Exclusive
Not the first time we've heard of a leaking crimp.
It will be interesting to hear what the electrovalve failure is, electrical, mechanical or hydraulic leakage.
It will be interesting to hear what the electrovalve failure is, electrical, mechanical or hydraulic leakage.
92 2.1SED M.RP5740 ECZ Sable Phenicien
92 3.0 V6-24.Rp 5713 EXY Black
92 2.1SD M.RP 5685 ENT Blue Sideral
Prev
90 2.1SD M.RP 5049 EJV Mandarin
92 2.1SD A.RP 5698 EJV Mandarin
94 2.1SD A.RP 6218 ERT Triton Green
91 2.0SI M.RP 5187 EWT White
92 3.0 V6-24.Rp 5713 EXY Black
92 2.1SD M.RP 5685 ENT Blue Sideral
Prev
90 2.1SD M.RP 5049 EJV Mandarin
92 2.1SD A.RP 5698 EJV Mandarin
94 2.1SD A.RP 6218 ERT Triton Green
91 2.0SI M.RP 5187 EWT White