M925 OVN

The place to show off and tell us all about your XMs (or even other cars). Should it be a big project, or just some general pics, start your thread in here.
Global Moderator
Posts: 5901
Joined: Wed Apr 15, 2009 8:11 am

Re: M925 OVN

Post by xmexclusive » Fri Jan 08, 2016 10:13 pm

I usually end up taking the tank out from its mountings with the LHM head loose in it.
Then with the tank tilted up towards the bonnet it can be dropped away from the LHM head.
It is much easier to empty and flush the tank off the car.

Another option is to undo and remove all the pipe ends.
Many of us will have replaced the Citroen clamps with jubilee clips making this an easy option.

Whatever you do have a small bowl or plenty of rags to soak up the spilled LHM.
LHM tends to slowly eat through ordinary rubber.


Global Moderator
Posts: 11608
Joined: Thu Jun 18, 2009 6:44 pm

Re: M925 OVN

Post by Dieselman » Sat Jan 09, 2016 3:12 pm

As said you can get the filter head out by undoing the tank and tilting it. As for the LHM, draw some off into a clear glass container and try to read a newspaper through it. If it is easily readable I would just go for cleaning the filters.
92 2.1SED M.RP5740 ECZ Sable Phenicien
92 3.0 V6-24.Rp 5713 EXY Black
92 2.1SD M.RP 5685 ENT Blue Sideral
90 2.1SD M.RP 5049 EJV Mandarin
92 2.1SD A.RP 5698 EJV Mandarin
94 2.1SD A.RP 6218 ERT Triton Green
91 2.0SI M.RP 5187 EWT White

Post Reply