M 95 S2 2.1td Autobox swap plus OTHER work

The place to show off and tell us all about your XMs (or even other cars). Should it be a big project, or just some general pics, start your thread in here.
Post Reply
citroenxm
Global Moderator
Posts: 9981
Joined: Wed Apr 15, 2009 9:11 am
Location: North Wales - FAR far far away!!! :-p

Re: M 95 S2 2.1td Autobox swap plus OTHER work

Post by citroenxm » Tue May 17, 2022 7:09 am

Of course I do.. I also have a number of others still on speedo clusters.. Manual and Autos
Projects:(eventually if theres any bodywork left)
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual

Others
In use.. 1995 M reg S2 2.1td auto exclusive

citroenxm
Global Moderator
Posts: 9981
Joined: Wed Apr 15, 2009 9:11 am
Location: North Wales - FAR far far away!!! :-p

Re: M 95 S2 2.1td Autobox swap plus OTHER work

Post by citroenxm » Thu May 19, 2022 1:48 pm

It appears the change of the pcb with green connector has sorted out the fuel guage.. The first one I tried the oil level didn't work.. I tried a second and one segment was out on the gear selector display.

Looking closer at the first replacement the solder for the row of pins on the side which push onto the main pcb had cracked so the first 5 pins weren't making contact.. After a flash over with soldering iorn and Refit I'm now very proud the oil level works.. The fuel guage now works and doesn't die and ALL gear. Selector segments in the lcd all work too.. Very happy now.

Next big task is the air con. It REALLY does need sorting I need. To fit another compressor as the system had a slow leak but not from any of the useual suspects around the engine bay. I then learnt that the compressor shaft seal can weap. So I have a couple of other r134a compressors. I'll swap it over connect it up.. Get a vac on it... If it holds try and work out a way to pressure the system with air with a compressor or something.. If it passes the test get a Groupon voucher and see what ats can do for me.

I'm quite happy with ats ac service I put a condenser rad on our 207 and took it to them they did a test.. Vacced it down put the gas in and its so far been good for 2 years..
Projects:(eventually if theres any bodywork left)
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual

Others
In use.. 1995 M reg S2 2.1td auto exclusive

Dieselman
Global Moderator
Posts: 13734
Joined: Thu Jun 18, 2009 6:44 pm

Re: M 95 S2 2.1td Autobox swap plus OTHER work

Post by Dieselman » Fri May 20, 2022 6:34 am

citroenxm wrote:
Thu May 19, 2022 1:48 pm
It appears the change of the pcb with green connector has sorted out the fuel guage.. The first one I tried the oil level didn't work.. I tried a second and one segment was out on the gear selector display.
A nice fix, there.
The one with the duff gear selector display could be useful for repairing mine with fried components.
92 2.1SED M.RP5740 ECZ Sable Phenicien
92 3.0 V6-24.Rp 5713 EXY Black
92 2.1SD M.RP 5685 ENT Blue Sideral
Prev
90 2.1SD M.RP 5049 EJV Mandarin
92 2.1SD A.RP 5698 EJV Mandarin
94 2.1SD A.RP 6218 ERT Triton Green
91 2.0SI M.RP 5187 EWT White

citroenxm
Global Moderator
Posts: 9981
Joined: Wed Apr 15, 2009 9:11 am
Location: North Wales - FAR far far away!!! :-p

Re: M 95 S2 2.1td Autobox swap plus OTHER work

Post by citroenxm » Fri May 20, 2022 6:38 am

Yea no problem I've a number of them as I have a number of instrument panels.. And some
Projects:(eventually if theres any bodywork left)
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual

Others
In use.. 1995 M reg S2 2.1td auto exclusive

citroenxm
Global Moderator
Posts: 9981
Joined: Wed Apr 15, 2009 9:11 am
Location: North Wales - FAR far far away!!! :-p

Re: M 95 S2 2.1td Autobox swap plus OTHER work

Post by citroenxm » Fri Jun 10, 2022 3:36 pm

Small observation today.. Which I wonder if any. Other td auto owners would try to compare.

I put the kickdown cable on today to check out.

The surge from third to fourth doesn't happen which I was aware of.. But what I did notice was it being a lot more sluggy and noticeably not as lively. I rechecked this by taking the kickdown back off and she was nice n lively again. Its not an imagery thing. It was noticeable different. I understand its an engine load cable. But.. Why would it make the car slower.. And because of the more revving use more fuel..??
Projects:(eventually if theres any bodywork left)
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual

Others
In use.. 1995 M reg S2 2.1td auto exclusive

citroenxm
Global Moderator
Posts: 9981
Joined: Wed Apr 15, 2009 9:11 am
Location: North Wales - FAR far far away!!! :-p

Re: M 95 S2 2.1td Autobox swap plus OTHER work

Post by citroenxm » Thu Jul 14, 2022 9:17 am

After a complete event less trip of 560 miles over three days to the national rally and home the weather was just too much.. the ac currently doesn't work on the car I decided to try and get it sorted.. I'm hoping its a leak on the compressor shaft seal as the rest of the system had no leaks but it still post gas over time. The compressor has been on it for as long as we know

Anyway. Got the front all stripped down..
Screenshot_20220713-134303_Gallery.jpg
The bumper reenforce bar is super order..
Screenshot_20220713-134232_Gallery.jpg
However...unfortunately the subframe front corner isn't..
Screenshot_20220714-100808_Gallery.jpg
Hmmmmmmmmm
You do not have the required permissions to view the files attached to this post.
Projects:(eventually if theres any bodywork left)
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual

Others
In use.. 1995 M reg S2 2.1td auto exclusive

Citjon
Has changed a sphere or two
Posts: 253
Joined: Wed Feb 12, 2020 6:47 pm
Orga / RP numbers: 8032

Re: M 95 S2 2.1td Autobox swap plus OTHER work

Post by Citjon » Thu Jul 14, 2022 10:31 am

Looks like you've caught it just in time.

At least access is easy and you won't have to lie on your back!
90 XM 2.0 Si manual RP4930 ETB Platinum
98 XM 2.1 VSX auto RP8032 EHJ Crimson Pearl
72 D Super 5 Black
72 DS21 efi Bleu D'Orient

citroenxm
Global Moderator
Posts: 9981
Joined: Wed Apr 15, 2009 9:11 am
Location: North Wales - FAR far far away!!! :-p

Re: M 95 S2 2.1td Autobox swap plus OTHER work

Post by citroenxm » Thu Jul 14, 2022 1:35 pm

Its how to sort it is the issue. Words I'd thought I would never hear but I'm not 8n the position to swap a full subframe . So.. do I cut the full square section out.. or do i just cut the top section off and swap it for a better peace from another one. I've about 4 about still..
Projects:(eventually if theres any bodywork left)
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual

Others
In use.. 1995 M reg S2 2.1td auto exclusive

Citjon
Has changed a sphere or two
Posts: 253
Joined: Wed Feb 12, 2020 6:47 pm
Orga / RP numbers: 8032

Re: M 95 S2 2.1td Autobox swap plus OTHER work

Post by Citjon » Thu Jul 14, 2022 3:28 pm

I think cutting the full section out would be your best option if the bottom half has also started to go. You could split the repair section horizontally and then stagger the joints with the bottom piece shorter than the top.
90 XM 2.0 Si manual RP4930 ETB Platinum
98 XM 2.1 VSX auto RP8032 EHJ Crimson Pearl
72 D Super 5 Black
72 DS21 efi Bleu D'Orient

citroenxm
Global Moderator
Posts: 9981
Joined: Wed Apr 15, 2009 9:11 am
Location: North Wales - FAR far far away!!! :-p

Re: M 95 S2 2.1td Autobox swap plus OTHER work

Post by citroenxm » Thu Jul 14, 2022 5:22 pm

I think the lower part is still solid.

I'll work something out.
Projects:(eventually if theres any bodywork left)
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual

Others
In use.. 1995 M reg S2 2.1td auto exclusive

Post Reply