The cill section behind the wing actually turned out to be in very good order with good paint cover and not needing any further treatment ... however the out rigger behind the jacking plate will need attention this year.
Anyway. I'm done. Retest on Friday.
20231115_101644.jpg
Seam seal applied.
Then I added some more.paint both sides...
20231115_130117.jpg
All attached. But not without further issues. The lower wing 10mm bolt on the A pillar decided to snap.. .anyway, the captive nut came away so I improvised and used some galvanised torx bolt and nut and managed to get it to grip nicely (no photo evedence)
We also had another problem in the tab that the lower wing front screws too was missing from the car.. so I needed to add a small L shape bracket which im glad I had to, as it turned out I had a gap which has been letting the water in to rot the outrigger as mentioned above.
So filled that in with a small patch, sealed it and put the bracket over it and further sealed it..
IMG-20231115-WA0002.jpg
Now we're all done and fixed up..
You do not have the required permissions to view the files attached to this post.