XM drivers window - not working

[pj3107]

Hi All
Would like a bit of help diagnosing my non working drivers door mirror (97 XM V6)
The window is half up/half down
The small light on the switch at front is On
Am attempting to diagnose if it's the switch or other electrical before I start on the door panel removal
The switch has 6 pins...left to right voltage readings
Ignition Off
12.6. 0.09. 12.7. 12.7. 0.0 12.7
Ignition On
13.5. 13.1. 13.1. 13.1. 0.03. 13
Switch in up Position
12.7. 13. 12.7. 12.7. 0.02. 12.7
Switch in Down position
12.7. 13. 12.7. 12.7. 0.02. 12.2

Any pointers would be gratefully received
Thanks in advance

[Dieselman]

You need to refer to the wiring diagrams, as we need to know the pin numbers you have power/Gnd on.

For the drivers door mirror there shouldn't be any power with Ign off.

Grey connector Pins 1,4,6 and permanent Gnd, Pins 2,3,5, are Ign fed power.

Black connector Pins 2,4 and Grey connector Pin 7 flip flop to make the mirror motors move, one direction, or the other.

Gabor's wiring diagrams, for Lhd Series2 Xm. viewtopic.php?f=13&t=7592&start=110#p132408

[pj3107]

Thanks Dieselman
The mirrors are separate from the door window switch...they are centre console mounted switches
I will continue to test/see what I can come up with
Can't attach a pic of switch
Cheers
PJ