Hello Chaps....new owner

New to the forum? Feel free to introduce yourself / your cars. Also have a look for any frequently asked questions and information.
Post Reply
Stickfinger
Citrobics expert
Posts: 662
Joined: Fri Nov 27, 2020 8:26 pm

Re: Hello Chaps....new owner

Post by Stickfinger » Fri Feb 19, 2021 12:51 pm

Cam box cover is off, I can see the compression strokes on each cylinder by watching the valves operate, each compression stroke "feels" like the same resistance/pressure build/release "force" (my long ratchet helps :) ) I can hear the valve "clack" shut when they come down off the cam. This all happens on each stroke.

xantia_v6
XM Guru
Posts: 1656
Joined: Sun Mar 31, 2013 5:09 pm
Location: Christchurch, New Zealand or Beaune, France

Re: Hello Chaps....new owner

Post by xantia_v6 » Fri Feb 19, 2021 5:21 pm

It just occurred to me that this car is an automatic, so would have a lightweight flywheel with the ring-gear attached. Does this change anything regarding the locking hole? or "other" holes?
1999 XM Exclusive V6 24V ES9 Manual (LHD) 105,000 km
1997 Xantia Exclusive V6 (RHD) 45,000 miles

Stickfinger
Citrobics expert
Posts: 662
Joined: Fri Nov 27, 2020 8:26 pm

Re: Hello Chaps....new owner

Post by Stickfinger » Fri Feb 19, 2021 6:40 pm

A question I have asked as well.....

Paul says no.....apparently they are the same. (not sure about these late type engines)

User avatar
White Exec
Citroen God!
Posts: 6642
Joined: Fri Mar 11, 2011 7:38 pm
Orga / RP numbers: RP7165
1996 2.5TD saloon, Exclusive, Polar White
1992 BX19D Millesime, Sable Phenicien
Location: ex-Ealing, Cheshire, W.Sussex & Surrey. Now living in Sayalonga (Malaga, Spain)

Re: Hello Chaps....new owner

Post by White Exec » Fri Feb 19, 2021 7:08 pm

Didn't notice any different instructions in the Private Cars booklets with respect of automatics.
Chris
1996 XM 2.5TD Exclusive RP7165 Polar White
1992 BX19D Millesime RP5800 Sable
1989 BX19RD Delage Red Deceased; 1998 ZX 1.9D Avantage auto Triton Green Company car 1998..2001; 2001 Xantia 1.8i auto Wicked Red Company car 2001..2003

xantia_v6
XM Guru
Posts: 1656
Joined: Sun Mar 31, 2013 5:09 pm
Location: Christchurch, New Zealand or Beaune, France

Re: Hello Chaps....new owner

Post by xantia_v6 » Fri Feb 19, 2021 8:24 pm

I was more wondering if on an automatic the balancing holes on the flywheel might be drilled quite close to the timing hole?
1999 XM Exclusive V6 24V ES9 Manual (LHD) 105,000 km
1997 Xantia Exclusive V6 (RHD) 45,000 miles

xantia_v6
XM Guru
Posts: 1656
Joined: Sun Mar 31, 2013 5:09 pm
Location: Christchurch, New Zealand or Beaune, France

Re: Hello Chaps....new owner

Post by xantia_v6 » Fri Feb 19, 2021 8:43 pm

If you turn the crank clockwise by about 90 degrees, you should be able to see the holes in the ring gear underneath the engine, which may give a clue as to what is going on?
1999 XM Exclusive V6 24V ES9 Manual (LHD) 105,000 km
1997 Xantia Exclusive V6 (RHD) 45,000 miles

User avatar
White Exec
Citroen God!
Posts: 6642
Joined: Fri Mar 11, 2011 7:38 pm
Orga / RP numbers: RP7165
1996 2.5TD saloon, Exclusive, Polar White
1992 BX19D Millesime, Sable Phenicien
Location: ex-Ealing, Cheshire, W.Sussex & Surrey. Now living in Sayalonga (Malaga, Spain)

Re: Hello Chaps....new owner

Post by White Exec » Fri Feb 19, 2021 8:47 pm

I would be surprised if such a silly mistake would have been made.
Would possibly have hampered original factory build as well.

Hopefully, you won't have to remove the gearbox to find out.
Is there are way to get sight of the rear face of the flywheel, to check what holes are there? Starter motor aperture, or at the end of the sump?
Chris
1996 XM 2.5TD Exclusive RP7165 Polar White
1992 BX19D Millesime RP5800 Sable
1989 BX19RD Delage Red Deceased; 1998 ZX 1.9D Avantage auto Triton Green Company car 1998..2001; 2001 Xantia 1.8i auto Wicked Red Company car 2001..2003

User avatar
Dean
Global Moderator
Posts: 6116
Joined: Wed Apr 15, 2009 7:53 am
Location: Isle of wight

Re: Hello Chaps....new owner

Post by Dean » Fri Feb 19, 2021 9:22 pm

I have not see an auto flywheel that has the timing hole, it is usually timed through the centre section of the crank pulley with a square section 3/8 bar on petrol auto xu engines.
92 Citroen XM Prestige 3.0i Auto R.P5678
14 Mitsubishi L200 Trojan
89 Talbot Express 2.0 coach built Auto-trail Chinook

Addicted to Crackanory

Dieselman
Global Moderator
Posts: 13735
Joined: Thu Jun 18, 2009 6:44 pm

Re: Hello Chaps....new owner

Post by Dieselman » Sat Feb 20, 2021 7:00 am

Stickfinger wrote:
Fri Feb 19, 2021 12:51 pm
Cam box cover is off, I can see the compression strokes on each cylinder by watching the valves operate, each compression stroke "feels" like the same resistance/pressure build/release "force" (my long ratchet helps :) ) I can hear the valve "clack" shut when they come down off the cam. This all happens on each stroke.
I'm not sure whether this is with the belt correctly timed, or in some other state?
If correctly timed, then isn't that the job completed?

The flywheel should be located correctly on the crankshaft journal by the bolts and a locating peg.
If someone has removed the peg it would be possible for the flywheel to be set at any position the bolts allow. Iirc, there are 8 bolts, so any position at 1/8th turn.
...So, lets forget the flywheel..

What needs to be set is the relationship between the pistons/crank and camshaft/valves.
Check the crank nose keyway hasn't been re-machined, by pulling the pulley off the nose of the crank, and check the relationship between the keyway and pistons/crankshaft.
To see the crankshaft you either need to remove the sump, or poke a boroscope/mini camera through the oil drain plug aperture.
The easiest crank and con rods to see will be No.2&3, which need to be at the very bottom of their stroke, with the con rods exactly aligned with the crank webs.
That means No 1&4 will be at TDC.

Mark the front pulley, lock the pump and cam, fit the belt.

You can check the flywheel later.
When rebuilding, mark the crank belt pulley and front casting permanently, with engraving, or punch marks.
Also mark the outer belt pulley with paint marks, for ease of timing TDC with the engine fully built, in future.

P.s. I checked and found my home made flywheel locking rod is 6mm.
The only reference I have stated 8mm for the 1.9 Xud, which I believe is the same Citroen tool set for all Xud.
The rod size is unimportant, as the crank pulley only has 21 teeth.
92 2.1SED M.RP5740 ECZ Sable Phenicien
92 3.0 V6-24.Rp 5713 EXY Black
92 2.1SD M.RP 5685 ENT Blue Sideral
Prev
90 2.1SD M.RP 5049 EJV Mandarin
92 2.1SD A.RP 5698 EJV Mandarin
94 2.1SD A.RP 6218 ERT Triton Green
91 2.0SI M.RP 5187 EWT White

Dieselman
Global Moderator
Posts: 13735
Joined: Thu Jun 18, 2009 6:44 pm

Re: Hello Chaps....new owner

Post by Dieselman » Sat Feb 20, 2021 7:31 am

Dean wrote:
Fri Feb 19, 2021 9:22 pm
I have not see an auto flywheel that has the timing hole, it is usually timed through the centre section of the crank pulley with a square section 3/8 bar on petrol auto xu engines.
That was the change in the casting that stickfinger noted.
Petrols timed by using the front pulley and casting register, diesels timed using the flywheel and hole in the rear of the block...or should...😐
92 2.1SED M.RP5740 ECZ Sable Phenicien
92 3.0 V6-24.Rp 5713 EXY Black
92 2.1SD M.RP 5685 ENT Blue Sideral
Prev
90 2.1SD M.RP 5049 EJV Mandarin
92 2.1SD A.RP 5698 EJV Mandarin
94 2.1SD A.RP 6218 ERT Triton Green
91 2.0SI M.RP 5187 EWT White

Post Reply