G'day From Australia!

New to the forum? Feel free to introduce yourself / your cars. Also have a look for any frequently asked questions and information.
Post Reply
citroenxm
Global Moderator
Posts: 8170
Joined: Wed Apr 15, 2009 9:11 am
Location: North Wales - FAR far far away!!! :-p

Re: G'day From Australia!

Post by citroenxm » Thu Jan 03, 2019 11:13 am

I guess with your dry climate there's no reason for any alloy corrosion to crush the rear sensors in place on the rear arms..
they are a nightmare for it here in the UK..
1990 H reg V6 24v Manual .. in progress.. on SORN
Projects:
92 L Xm 2.1t D auto project
Others
07 c5 2.2 hdi 173bhp manual

Dieselman
Global Moderator
Posts: 10916
Joined: Thu Jun 18, 2009 6:44 pm

Re: G'day From Australia!

Post by Dieselman » Thu Jan 03, 2019 12:35 pm

motorgnome wrote:
Thu Jan 03, 2019 10:35 am


So, I move on to the Hydractive. As I posted earlier, I have installed an LED tell tale so I can monitor electrovalve operation, as I wasn't happy with the ride quality. Well I can see it switch, but it's pretty random (to me) & it spends more time in hard than soft. I can make it switch with the steering, accelerator & brake, but I can be cruising along a flat, straight road at 70kph (40mph), light throttle, just ticking along & it'll be in hard mode..Half way through a corner it'll switch to soft. Something is wrong. I checked for fault codes & have code 25, which I believe is the Body sensor.
Suspect a poor connection.
If any sensor fails to give variable feedback the ECU assumes sensor failure and reverts to hard mode.

The body movement sensor is usually the least sensitive.
Perform the checks detailed in the below thread.
viewtopic.php?f=7&t=9038
92 2.1SED M.RP5740 ECZ Sable Phenicien
92 3.0 V6-24.Rp 5713 EXY Black
92 2.1SD M.RP 5685 ENT Blue Sideral
Prev
90 2.1SD M.RP 5049 EJV Mandarin
92 2.1SD A.RP 5698 EJV Mandarin
94 2.1SD A.RP 6218 ERT Triton Green
91 2.0SI M.RP 5187 EWT White

Post Reply