Page 8 of 12

Re: New member - barn find S1 Auto

Posted: Wed Apr 07, 2021 6:05 am
by Dieselman
It's different to the 2.1td, but I suspect all 2.0-8v use the same pipe, as afaik, the regulator doesn't move location from manual to auto.

If really stuck, Pleiades could probably make one for you.

Re: New member - barn find S1 Auto

Posted: Thu Apr 08, 2021 6:35 am
by Dieselman
I've checked.
The 2.0 petrol and 2.1 diesel do use the same pipe, but only for automatic gearboxes.
The manual boxed versions use different length pipe to the auto and each other.

I'll look up all the pipes.

Re: New member - barn find S1 Auto

Posted: Thu Apr 08, 2021 7:09 am
by citroenxm
thay makes sense as the 2.0 manual uses a be3 box and 2.1td manual, uses the larger M series box so I'd suspect the regulator sits is a different place..

Re: New member - barn find S1 Auto

Posted: Fri Apr 09, 2021 6:38 am
by Dieselman
Having looked again I see the 2.0 petrol and 2.1td pipes are different part numbers, but the length for the 2.1 isn't listed, so technically the only pipe that will fit is the one for the 2.0i Auto.

See attached list

Re: New member - barn find S1 Auto

Posted: Sat Apr 10, 2021 1:13 am
by Citjon
That is really helpful, thank you. Pleiades is probably my best option in view of this.

Re: New member - barn find S1 Auto

Posted: Sat Apr 10, 2021 6:11 am
by Dean
Morning Citjon

If you are looking for the HP pump to distribution valve supply pipe, I think I have one. I will have a look later and get a photo for you.

D

Re: New member - barn find S1 Auto

Posted: Sat Apr 10, 2021 7:55 am
by Citjon
Morning Dean,

Yes that would be great if you have got one.

Many thanks

Re: New member - barn find S1 Auto

Posted: Sat Apr 10, 2021 8:17 am
by Dieselman
If that fails, it looks like these people might have some.

http://130.226.11.57/cgi/mp?eng%A496027353

Alternatively, pleiades, or a local hydraulics specialist may be able to make one for you. 6.35mm is 1/4" pipe.

Re: New member - barn find S1 Auto

Posted: Sat Apr 10, 2021 2:53 pm
by Citjon
Made a bit of progress over the last few days. Front panels refitted but will need adjusting to get the gaps something like.

Nice day for a test drive!

Re: New member - barn find S1 Auto

Posted: Sat Apr 10, 2021 4:09 pm
by Dieselman
That appears to be in great condition...and nearly ready for the road.