sageman's 'barn find' v6 sei s1

The place to show off and tell us all about your XMs (or even other cars). Should it be a big project, or just some general pics, start your thread in here.
User avatar
sageman
Knows how to use the parking brake
Posts: 198
Joined: Sat Sep 16, 2017 5:07 pm
Location: norwich

Re: sageman's 'barn find' v6 sei s1

Post by sageman » Sun Nov 10, 2019 6:14 pm

yes off-side feed to strut
1976 Reliant kitten
1985 Reliant fox Tandy campervan
1998 Peugeot 306 GTI-6
h̶o̶p̶e̶f̶u̶l̶l̶y̶ ̶a̶n̶ ̶X̶M̶ ̶o̶n̶e̶ ̶d̶a̶y̶
1993 XM sei V6 RP 5876

citroenxm
Global Moderator
Posts: 9981
Joined: Wed Apr 15, 2009 9:11 am
Location: North Wales - FAR far far away!!! :-p

Re: sageman's 'barn find' v6 sei s1

Post by citroenxm » Tue Nov 12, 2019 6:28 pm

Yes ok should have one or two.. theres a few hanging up..
Projects:(eventually if theres any bodywork left)
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual

Others
In use.. 1995 M reg S2 2.1td auto exclusive

xantia_v6
XM Guru
Posts: 1656
Joined: Sun Mar 31, 2013 5:09 pm
Location: Christchurch, New Zealand or Beaune, France

Re: sageman's 'barn find' v6 sei s1

Post by xantia_v6 » Wed Nov 13, 2019 9:02 am

I would have thought it would be easier to correct the thread on the existing fitting, with a thread file (if you are lucky enough to have one), or with a needle file just to clean up the thread start. The secret of course is to have the pipe correctly aligned.
1999 XM Exclusive V6 24V ES9 Manual (LHD) 105,000 km
1997 Xantia Exclusive V6 (RHD) 45,000 miles

User avatar
White Exec
Citroen God!
Posts: 6642
Joined: Fri Mar 11, 2011 7:38 pm
Orga / RP numbers: RP7165
1996 2.5TD saloon, Exclusive, Polar White
1992 BX19D Millesime, Sable Phenicien
Location: ex-Ealing, Cheshire, W.Sussex & Surrey. Now living in Sayalonga (Malaga, Spain)

Re: sageman's 'barn find' v6 sei s1

Post by White Exec » Wed Nov 13, 2019 9:36 am

I have this written down. Info was from Pleiades, I think...

3.5mm pipe M8 x 1.25
4.5mm pipe M9 x 1.25
old 6.35mm pipe M12 x 1.25
new 6mm pipe M12 x 1
Chris
1996 XM 2.5TD Exclusive RP7165 Polar White
1992 BX19D Millesime RP5800 Sable
1989 BX19RD Delage Red Deceased; 1998 ZX 1.9D Avantage auto Triton Green Company car 1998..2001; 2001 Xantia 1.8i auto Wicked Red Company car 2001..2003

User avatar
sageman
Knows how to use the parking brake
Posts: 198
Joined: Sat Sep 16, 2017 5:07 pm
Location: norwich

Re: sageman's 'barn find' v6 sei s1

Post by sageman » Fri Nov 15, 2019 7:18 pm

Ok thank you
having a good think at work I was starting to wonder if it was possable to repair threads with a small file we will see

And thanks for those sizes although I don’t think they come from Pleiades I did ring them
1976 Reliant kitten
1985 Reliant fox Tandy campervan
1998 Peugeot 306 GTI-6
h̶o̶p̶e̶f̶u̶l̶l̶y̶ ̶a̶n̶ ̶X̶M̶ ̶o̶n̶e̶ ̶d̶a̶y̶
1993 XM sei V6 RP 5876

citroenxm
Global Moderator
Posts: 9981
Joined: Wed Apr 15, 2009 9:11 am
Location: North Wales - FAR far far away!!! :-p

Re: sageman's 'barn find' v6 sei s1

Post by citroenxm » Fri Nov 15, 2019 9:33 pm

Ok. Worth a try as its some job to swap those fronts.. in the mean time I have sorted out a front pipe..
Projects:(eventually if theres any bodywork left)
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual

Others
In use.. 1995 M reg S2 2.1td auto exclusive

User avatar
sageman
Knows how to use the parking brake
Posts: 198
Joined: Sat Sep 16, 2017 5:07 pm
Location: norwich

Re: sageman's 'barn find' v6 sei s1

Post by sageman » Sat Nov 16, 2019 6:47 pm

Oh thank you

I will measure and confirm tomorrow but would mine likly be the early 6.35mm pipe it’s late 1992 build

I also finally sorted out that chewed hydractive harness by the nearside strut once I worked out the broken wires were on the ecu side of the harness it was much easer than expected
As mine is a single electrovalve car am I right in saying that I don’t need the E-crofting box or anything else added to the hydractive side
1976 Reliant kitten
1985 Reliant fox Tandy campervan
1998 Peugeot 306 GTI-6
h̶o̶p̶e̶f̶u̶l̶l̶y̶ ̶a̶n̶ ̶X̶M̶ ̶o̶n̶e̶ ̶d̶a̶y̶
1993 XM sei V6 RP 5876

User avatar
White Exec
Citroen God!
Posts: 6642
Joined: Fri Mar 11, 2011 7:38 pm
Orga / RP numbers: RP7165
1996 2.5TD saloon, Exclusive, Polar White
1992 BX19D Millesime, Sable Phenicien
Location: ex-Ealing, Cheshire, W.Sussex & Surrey. Now living in Sayalonga (Malaga, Spain)

Re: sageman's 'barn find' v6 sei s1

Post by White Exec » Sat Nov 16, 2019 6:58 pm

Just add one diode to the suspension ECU output, instead of the two for later H2 cars.
Although only one EV, the arrangement is the same, with a working reverse diode to protect the ECU output, and ensure proper EV pull- and hold-in.
A single 400V 6A diode will be more than adequate (and not too miniature). Connect diode stripe to ECU output, other end (anode) to a good Gnd.
Chris
1996 XM 2.5TD Exclusive RP7165 Polar White
1992 BX19D Millesime RP5800 Sable
1989 BX19RD Delage Red Deceased; 1998 ZX 1.9D Avantage auto Triton Green Company car 1998..2001; 2001 Xantia 1.8i auto Wicked Red Company car 2001..2003

citroenxm
Global Moderator
Posts: 9981
Joined: Wed Apr 15, 2009 9:11 am
Location: North Wales - FAR far far away!!! :-p

Re: sageman's 'barn find' v6 sei s1

Post by citroenxm » Sat Nov 16, 2019 7:19 pm

Wasn't aware of a thread size change on them..
Projects:(eventually if theres any bodywork left)
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual

Others
In use.. 1995 M reg S2 2.1td auto exclusive

Dieselman
Global Moderator
Posts: 13734
Joined: Thu Jun 18, 2009 6:44 pm

Re: sageman's 'barn find' v6 sei s1

Post by Dieselman » Sun Nov 17, 2019 9:03 am

I thought the thread pitch change was for the pump threads. Later 6+2 pumps do have a finer thread than earlier pump threads.
92 2.1SED M.RP5740 ECZ Sable Phenicien
92 3.0 V6-24.Rp 5713 EXY Black
92 2.1SD M.RP 5685 ENT Blue Sideral
Prev
90 2.1SD M.RP 5049 EJV Mandarin
92 2.1SD A.RP 5698 EJV Mandarin
94 2.1SD A.RP 6218 ERT Triton Green
91 2.0SI M.RP 5187 EWT White

Post Reply