Well, after being so smug my wife's 2.1 has about 300,000 on the clock and no major problems, it turns out we have an oil leak. The sump has a hole in it!!
I'm told this isn't unusual, Fords, Vauxhalls etc. But an XM?
Well, looks as if I now need a sump. Does anyone have a decent sump they want to sell?
Or, what other motors use this 2.1 engine, if any?
Any help gratefully received.
Richard
2.1 Sump
-
- Global Moderator
- Posts: 5925
- Joined: Wed Apr 15, 2009 8:11 am
Re: 2.1 Sump
Richard
I seem to remember that the sump is different for aircon than non aircon.
John
I seem to remember that the sump is different for aircon than non aircon.
John
-
- Global Moderator
- Posts: 14436
- Joined: Thu Jun 18, 2009 6:44 pm
Re: 2.1 Sump
The Xantia, 406 and 605 use the same engine.
91 3.0 sei M. 4852 EXY Black
92 2.1 sed M. 5740 ECZ Sable Phenicien
92 3.0 V6-24. 5713 EXY Black
92 2.1 sd M. 5685 ENT Blue Sideral
Prev
90 2.1sd M. 5049 EJV Mandarin
92 2.1sd A. 5698 EJV Mandarin
94 2.1sd A. 6218 ERT Triton
91 2.0si M. 5187 EWT White
92 2.1 sed M. 5740 ECZ Sable Phenicien
92 3.0 V6-24. 5713 EXY Black
92 2.1 sd M. 5685 ENT Blue Sideral
Prev
90 2.1sd M. 5049 EJV Mandarin
92 2.1sd A. 5698 EJV Mandarin
94 2.1sd A. 6218 ERT Triton
91 2.0si M. 5187 EWT White
-
- Global Moderator
- Posts: 4002
- Joined: Wed Apr 15, 2009 8:29 am
- Location: Charmouth, Dorset
Re: 2.1 Sump
Can't remember where you are, I might have one, but I really need you to take it off
Peter
Peter
'96 'N' 2.1 td VSX manual estate White RP6695. Sadly gone
2008 C5 2.0. Hdi Estate, Red
2008 C5 2.0. Hdi Estate Silver
Located in Charmouth, Dorset
2008 C5 2.0. Hdi Estate, Red
2008 C5 2.0. Hdi Estate Silver
Located in Charmouth, Dorset
-
- Could do a 2.1 headgasket
- Posts: 1132
- Joined: Fri May 01, 2009 10:07 pm
- Location: Grantown-on-Spey
Re: 2.1 Sump
Hi all, dropped one of my 2.1's when the trolley jack slipped and with the car depressurised it sat on one corner of the jack frame cracking the cast alloy sump.It really is an awkward job removing one,the a/c compressor has to come off,the osf corner of the sump flange will not clear the subframe and you must lift the engine up to enable it to do so.The protusion of the oil level indicator and oil pump pick-up prevent any movement other than vertically down.I broke the former before realising it should be removed first.
The good news was my local precision engineering workshop repaired it by welding for £25.
robertm
The good news was my local precision engineering workshop repaired it by welding for £25.
robertm