Wanted two exhaust manifold studs

Selling off one (or bits :o) of your XM collection, or perhaps searching for those elusive headlight washer covers? This is the place to do it.
Post Reply
zaphod
Has changed a sphere or two
Posts: 350
Joined: Sun May 30, 2010 10:35 pm
Location: Magrathea

Wanted two exhaust manifold studs

Post by zaphod » Wed Sep 05, 2012 6:29 pm

As above, I need 2 for my TCT turbo, one was already missing when I took it apart, the other is partially sheared!
1999 Rover 75 Conneseur 2.5 V6 auto
1994 TCT Exclusive manual (Half of them)
1992 Range Rover Vogue SE
1985 Golf GTI
1975 MG Midget
1959 Austin Healey Sprite Mk1

citroenxm
Global Moderator
Posts: 9987
Joined: Wed Apr 15, 2009 9:11 am
Location: North Wales - FAR far far away!!! :-p

Re: Wanted two exhaust manifold studs

Post by citroenxm » Wed Sep 05, 2012 7:49 pm

Damm Stuart .. should of chucked a few in.. the ones i removed are probably lieing on the floor.. ill be at the farm again Friday.. ill have a look and chuck a couple in a jiff bag for you.. unless your appearing at cxm on Sunday which case i can bring and had them to you...
Projects:(eventually if theres any bodywork left)
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual

Others
In use.. 1995 M reg S2 2.1td auto exclusive

zaphod
Has changed a sphere or two
Posts: 350
Joined: Sun May 30, 2010 10:35 pm
Location: Magrathea

Re: Wanted two exhaust manifold studs

Post by zaphod » Wed Sep 05, 2012 8:11 pm

That would be really good, I should have ordered them when I ordered the rest of the bits from the local main stealer but forgot about them. Unfortunately I shall be putting TCT together at the weekend! the missing studs won't really be a show stopper till I want to put the heat shield back on
1999 Rover 75 Conneseur 2.5 V6 auto
1994 TCT Exclusive manual (Half of them)
1992 Range Rover Vogue SE
1985 Golf GTI
1975 MG Midget
1959 Austin Healey Sprite Mk1

Dieselman
Global Moderator
Posts: 14456
Joined: Thu Jun 18, 2009 6:44 pm

Re: Wanted two exhaust manifold studs

Post by Dieselman » Wed Sep 05, 2012 8:19 pm

Most fixings and fastenings suppliers, or motor factors will stock studs.
91 3.0 sei M. 4852 EXY Black
92 2.1 sed M. 5740 ECZ Sable Phenicien
92 3.0 V6-24. 5713 EXY Black
92 2.1 sd M. 5685 ENT Blue Sideral
Prev
90 2.1sd M. 5049 EJV Mandarin
92 2.1sd A. 5698 EJV Mandarin
94 2.1sd A. 6218 ERT Triton
91 2.0si M. 5187 EWT White

zaphod
Has changed a sphere or two
Posts: 350
Joined: Sun May 30, 2010 10:35 pm
Location: Magrathea

Re: Wanted two exhaust manifold studs

Post by zaphod » Wed Sep 05, 2012 8:33 pm

problem is round here none are open at the weekend!
1999 Rover 75 Conneseur 2.5 V6 auto
1994 TCT Exclusive manual (Half of them)
1992 Range Rover Vogue SE
1985 Golf GTI
1975 MG Midget
1959 Austin Healey Sprite Mk1

Post Reply