Help needed

Off topic chat about anything you like. Doesn't have to be about XMs (though they will inevitibly come up!). You can even discuss non-Citroens :o in here!
Post Reply
User avatar
VeronicaVeronese
Can find the S1 radio
Posts: 23
Joined: Mon Jul 29, 2013 12:21 pm
Orga / RP numbers: RP 7326
November 1996
Location: Wrexham, North Wales
Contact:

Help needed

Post by VeronicaVeronese » Tue Apr 22, 2014 9:27 pm

If anyone can help out with my recent posting under Diesel Engines, I'd be very grateful.
Many thanks
Catherine


Sent from my iPad using Tapatalk HD
Catherine Reynolds
XM Enthusiast

Peter.N.
Global Moderator
Posts: 4002
Joined: Wed Apr 15, 2009 8:29 am
Location: Charmouth, Dorset

Re: Help needed

Post by Peter.N. » Tue Apr 22, 2014 10:31 pm

Hi Catherine

Found your post but don't have any bits to help I'm afraid. 2.1. spares are getting a bit thin on the ground now, I would suggest that you look on ebay for one being broken. Try these people for a start: http://www.ebay.co.uk/itm/1998-R-CITROE ... 1945b28.If you look through the listings you may find what you want nearer and cheaper.

Peter
'96 'N' 2.1 td VSX manual estate White RP6695. Sadly gone
2008 C5 2.0. Hdi Estate, Red
2008 C5 2.0. Hdi Estate Silver


Located in Charmouth, Dorset

southerner
Knows how to use the parking brake
Posts: 238
Joined: Tue Aug 21, 2012 10:26 am

Re: Help needed

Post by southerner » Thu Apr 24, 2014 4:46 pm

I have a 1994 2.1 td estate that i have broken up the ac is still fitted (well as much as it can be with the engine bay near on empty, the whole ac system is fitted was working prefect when car was broken up no leaks and still fully charge.
If you want it then just make an offer and come and get it.

kingp
Could do a 2.1 headgasket
Posts: 1109
Joined: Fri Aug 09, 2013 8:11 pm
Location: Near Warrington

Re: Help needed

Post by kingp » Tue Apr 29, 2014 6:13 am

There is someone breaking a 2.1 epic Xantia on the FCF if thats any use to you at all?

xmexclusive
Global Moderator
Posts: 5925
Joined: Wed Apr 15, 2009 8:11 am

Re: Help needed

Post by xmexclusive » Tue Apr 29, 2014 10:15 am

I believe the XUD11A and XUD11B engines used the same two sump types.
Non A/C engines used a metal sump.
A/C used an Alloy sump with brackets cast in the front for the compressor.
I am near to southerner and might be able to help with sump recovery.

John

kingp
Could do a 2.1 headgasket
Posts: 1109
Joined: Fri Aug 09, 2013 8:11 pm
Location: Near Warrington

Re: Help needed

Post by kingp » Tue Apr 29, 2014 11:51 am

Alloy sumps are evil things!!

southerner
Knows how to use the parking brake
Posts: 238
Joined: Tue Aug 21, 2012 10:26 am

Re: Help needed

Post by southerner » Thu May 01, 2014 1:09 pm

John while your here I looking for a black front leather seat driver side the one with out the heating built into the seat, I took mine up to car upholstery unable to do it because they don't have the right colour black and the cost was a little bit high

Post Reply