Our new baby, silver '94 XM 2.0i SX auto estate
-
- Knows how to use the parking brake
- Posts: 182
- Joined: Wed Feb 25, 2015 4:31 pm
- Orga / RP numbers: 6470
- Location: below manchester but above brum
Re: Our new baby, silver '94 XM 2.0i SX auto estate
I may leave it but as we have a spare selector & they're easy to swap there's no problem if we did modify it and wanted to return to original spec in future. I've actually never accidentally selected N in any other auto, so not sure why Citroen worried about people doing it From what I've read clutch wear isn't an issue with the HP18, whereas springs losing temper and fluid damage through overheating is. Still, it's a subjective thing & those who want to stay in D I'm not saying either way is right or wrong, just my preference to go for N when sat for a while.
Anyhoo, had a productive afternoon's work today, got all the interior out & stored away, bar the headlining (might have to come down to sort the jammed sunroof though), B pillar trims, seatbelt reels and dash/heater etc, carpet and sound deadening rolled back out of the way and some nasty holes revealed at the join between the floorpan and inner sill down the driver's side, plus a small patch required round one of the rubber floor "bungs" in the rear footwell. Should be getting on with some cutting/welding as soon as funds recover enough to afford some more cutting discs and paint/seam sealer etc. (of course once any pipework underneath is suitably removed/protected)
One thing I did notice during stripdown was the strange throttle position sensor on the pedal unit, is this a TPS in the regular sense just mounted in a very "citroen" place, or is it a secondary sensor perhaps related to HA2?
Cheers
Anyhoo, had a productive afternoon's work today, got all the interior out & stored away, bar the headlining (might have to come down to sort the jammed sunroof though), B pillar trims, seatbelt reels and dash/heater etc, carpet and sound deadening rolled back out of the way and some nasty holes revealed at the join between the floorpan and inner sill down the driver's side, plus a small patch required round one of the rubber floor "bungs" in the rear footwell. Should be getting on with some cutting/welding as soon as funds recover enough to afford some more cutting discs and paint/seam sealer etc. (of course once any pipework underneath is suitably removed/protected)
One thing I did notice during stripdown was the strange throttle position sensor on the pedal unit, is this a TPS in the regular sense just mounted in a very "citroen" place, or is it a secondary sensor perhaps related to HA2?
Cheers
1994 XM S2 2.0i SX, Estate, Gris quartz met. "or is it????", new project and already our pride & joy!
1996 ZX 1.9TD Elation, Hatch, also Gris quartz metallic, daily workhorse and tatty with it...
1996 ZX 1.9TD Elation, Hatch, also Gris quartz metallic, daily workhorse and tatty with it...
- russ92xmsed
- Global Moderator
- Posts: 5733
- Joined: Mon Jun 11, 2012 5:23 pm
- Location: Cheltenham
- Contact:
Re: Our new baby, silver '94 XM 2.0i SX auto estate
If it's red, then it's to do with the hydractive. It's one of five sensors.
Russ
1992 K reg XM 2.1 Auto SED RP 5712
1992 K reg XM 2.1 Auto SED RP 5705 (D)
Also
2003 C5 2.2 HDI Exclusive
I sell Engine bay, 1990 COTY, Total & Club XM Sticker Decals
http://www.rjwcreativedesign.co.uk
1992 K reg XM 2.1 Auto SED RP 5712
1992 K reg XM 2.1 Auto SED RP 5705 (D)
Also
2003 C5 2.2 HDI Exclusive
I sell Engine bay, 1990 COTY, Total & Club XM Sticker Decals
http://www.rjwcreativedesign.co.uk
-
- Knows how to use the parking brake
- Posts: 182
- Joined: Wed Feb 25, 2015 4:31 pm
- Orga / RP numbers: 6470
- Location: below manchester but above brum
Re: Our new baby, silver '94 XM 2.0i SX auto estate
Yep it's the red baby, cheers
Itching to get stuck in now but waiting till we can afford the consumables to do the welding work, as it's a nice day though might try and grab a half hour or so later to drop the headlining & see to the sunroof/inspect the drains so at least that can be out of the way ready (plus one more exit route for smoke/fumes from the welding haha)
Itching to get stuck in now but waiting till we can afford the consumables to do the welding work, as it's a nice day though might try and grab a half hour or so later to drop the headlining & see to the sunroof/inspect the drains so at least that can be out of the way ready (plus one more exit route for smoke/fumes from the welding haha)
1994 XM S2 2.0i SX, Estate, Gris quartz met. "or is it????", new project and already our pride & joy!
1996 ZX 1.9TD Elation, Hatch, also Gris quartz metallic, daily workhorse and tatty with it...
1996 ZX 1.9TD Elation, Hatch, also Gris quartz metallic, daily workhorse and tatty with it...
-
- Knows how to use the parking brake
- Posts: 182
- Joined: Wed Feb 25, 2015 4:31 pm
- Orga / RP numbers: 6470
- Location: below manchester but above brum
Re: Our new baby, silver '94 XM 2.0i SX auto estate
Nothing to report today despite the lovely weather, been busy with the kids & my better half feeling ill all day so the most I've done to the XM today is rescue some old cereal boxes and put them in the garage to use as templates for the repairs to the chassis. Luck (and tummy bugs) providing, there will be more like a working sunroof soon
1994 XM S2 2.0i SX, Estate, Gris quartz met. "or is it????", new project and already our pride & joy!
1996 ZX 1.9TD Elation, Hatch, also Gris quartz metallic, daily workhorse and tatty with it...
1996 ZX 1.9TD Elation, Hatch, also Gris quartz metallic, daily workhorse and tatty with it...
-
- Knows how to use the parking brake
- Posts: 182
- Joined: Wed Feb 25, 2015 4:31 pm
- Orga / RP numbers: 6470
- Location: below manchester but above brum
Re: Our new baby, silver '94 XM 2.0i SX auto estate
Oh, quick question ('nother newbie one as well haha) what's the difference if any between LHM and LHM+ ? Looking on the bay trying to find the best price and the cheapest that comes up is all LHM+
Also, how much would we be likely to need to do a complete change, drain/refill the tank and bleed through all the lines?
Cheers
Also, how much would we be likely to need to do a complete change, drain/refill the tank and bleed through all the lines?
Cheers
1994 XM S2 2.0i SX, Estate, Gris quartz met. "or is it????", new project and already our pride & joy!
1996 ZX 1.9TD Elation, Hatch, also Gris quartz metallic, daily workhorse and tatty with it...
1996 ZX 1.9TD Elation, Hatch, also Gris quartz metallic, daily workhorse and tatty with it...
-
- Global Moderator
- Posts: 9987
- Joined: Wed Apr 15, 2009 9:11 am
- Location: North Wales - FAR far far away!!! :-p
Re: Our new baby, silver '94 XM 2.0i SX auto estate
LHM and LHM+ same thing! 5 Litres will sort you out! Theres ALWAYS a bit left in the system!
You can get 5 litres of LHM on ebay for about 25 quid... or so!
You can get 5 litres of LHM on ebay for about 25 quid... or so!
Projects:(eventually if theres any bodywork left)
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual
Others
In use.. 1995 M reg S2 2.1td auto exclusive
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual
Others
In use.. 1995 M reg S2 2.1td auto exclusive
-
- Knows how to use the parking brake
- Posts: 182
- Joined: Wed Feb 25, 2015 4:31 pm
- Orga / RP numbers: 6470
- Location: below manchester but above brum
Re: Our new baby, silver '94 XM 2.0i SX auto estate
Thanks for confirming that, I had a feeling it might be so but didn't want to hit buy now until I was 100%
Found some for 22 quid delivered so not too bad in the big scheme of all things oily. I had imagined it being a bit like changing autobox fluid Re: residual fluid being left in the system, PAS and suspension/pipework would hold some back I guess? TBF what's in there doesn't *look* bad to my as yet inexpert eye but it would just be nice to start off knowing exactly when it was last changed.
One thing I did notice that bodes well for our suspension was the split return pipe on the osf corner, which had come completely adrift, yet even having gone all the way between full height and flat on it's belly a couple of times there was not a huge amount of spill off from the pipe before my *very* temporary fix of just pushing the broken end back on the hard pipe. This would suggest, to me at least, that (this one corner anyway) has very little wear & tear on the hydraulic ram since I've heard that a split return can create a real rustproofing-spray style mess under there. More permanent repair to come when I have a better look and decide whether to cut/join the original pipe or find a Xantia one which I understand is identical.
More coffee now please, should stop me rambling on all morning and get something done!
Found some for 22 quid delivered so not too bad in the big scheme of all things oily. I had imagined it being a bit like changing autobox fluid Re: residual fluid being left in the system, PAS and suspension/pipework would hold some back I guess? TBF what's in there doesn't *look* bad to my as yet inexpert eye but it would just be nice to start off knowing exactly when it was last changed.
One thing I did notice that bodes well for our suspension was the split return pipe on the osf corner, which had come completely adrift, yet even having gone all the way between full height and flat on it's belly a couple of times there was not a huge amount of spill off from the pipe before my *very* temporary fix of just pushing the broken end back on the hard pipe. This would suggest, to me at least, that (this one corner anyway) has very little wear & tear on the hydraulic ram since I've heard that a split return can create a real rustproofing-spray style mess under there. More permanent repair to come when I have a better look and decide whether to cut/join the original pipe or find a Xantia one which I understand is identical.
More coffee now please, should stop me rambling on all morning and get something done!
1994 XM S2 2.0i SX, Estate, Gris quartz met. "or is it????", new project and already our pride & joy!
1996 ZX 1.9TD Elation, Hatch, also Gris quartz metallic, daily workhorse and tatty with it...
1996 ZX 1.9TD Elation, Hatch, also Gris quartz metallic, daily workhorse and tatty with it...
- Eddie nuff
- Could do a 2.1 headgasket
- Posts: 1229
- Joined: Mon Feb 25, 2013 7:53 pm
- Location: West Yorkshire
- White Exec
- Citroen God!
- Posts: 6642
- Joined: Fri Mar 11, 2011 7:38 pm
- Orga / RP numbers: RP7165
1996 2.5TD saloon, Exclusive, Polar White
1992 BX19D Millesime, Sable Phenicien - Location: ex-Ealing, Cheshire, W.Sussex & Surrey. Now living in Sayalonga (Malaga, Spain)
Re: Our new baby, silver '94 XM 2.0i SX auto estate
Strut spill-back pipes still available from Citroen, and right, same as Xantia.
Total Hydraurincage (5-litre) now available once more in UK, via Citroen and elsewhere. Total bring it into UK as needed.
Total Hydraurincage (5-litre) now available once more in UK, via Citroen and elsewhere. Total bring it into UK as needed.
Chris
1996 XM 2.5TD Exclusive RP7165 Polar White
1992 BX19D Millesime RP5800 Sable
1989 BX19RD Delage Red Deceased; 1998 ZX 1.9D Avantage auto Triton Green Company car 1998..2001; 2001 Xantia 1.8i auto Wicked Red Company car 2001..2003
1996 XM 2.5TD Exclusive RP7165 Polar White
1992 BX19D Millesime RP5800 Sable
1989 BX19RD Delage Red Deceased; 1998 ZX 1.9D Avantage auto Triton Green Company car 1998..2001; 2001 Xantia 1.8i auto Wicked Red Company car 2001..2003
-
- Knows how to use the parking brake
- Posts: 182
- Joined: Wed Feb 25, 2015 4:31 pm
- Orga / RP numbers: 6470
- Location: below manchester but above brum
Re: Our new baby, silver '94 XM 2.0i SX auto estate
Good idea, may as well go the whole hog. Still got to find time to do the more important bits yet though (structural welding and sorting brakes).
Gorgeous day today but not looking like I'll get time to do anything car related apart from maybe drive the ZX up to the flat and collect an old Volvo bonnet and Vectra doors to use as patch material... I know, poor old girl will probably scream when she sees such rubbish being grafted to her belly but needs must, and I'll try to limit my material usage to the Swedish panel as I know we'd all hate for there to be ANY Va****ll involved!
Gorgeous day today but not looking like I'll get time to do anything car related apart from maybe drive the ZX up to the flat and collect an old Volvo bonnet and Vectra doors to use as patch material... I know, poor old girl will probably scream when she sees such rubbish being grafted to her belly but needs must, and I'll try to limit my material usage to the Swedish panel as I know we'd all hate for there to be ANY Va****ll involved!
1994 XM S2 2.0i SX, Estate, Gris quartz met. "or is it????", new project and already our pride & joy!
1996 ZX 1.9TD Elation, Hatch, also Gris quartz metallic, daily workhorse and tatty with it...
1996 ZX 1.9TD Elation, Hatch, also Gris quartz metallic, daily workhorse and tatty with it...