K-BAN has a new home
- raynoon
- Could do a 2.1 headgasket
- Posts: 1128
- Joined: Mon Aug 31, 2015 7:38 am
- Orga / RP numbers: 6043
- Location: Merseyside
Re: K-BAN has a new home
It's been raining heavy for several hours now... Sunroof seal is leaking...
1993 Citroen XM 2.1 turboSD auto
1995 Citroen XM 2.1TD Auto EXCLUSIVE
1995 Citroen XM 2.1TD Auto EXCLUSIVE
- Dean
- Global Moderator
- Posts: 6116
- Joined: Wed Apr 15, 2009 7:53 am
- Location: Isle of wight
Re: K-BAN has a new home
Sorry to hear that Ray, have you fitted the headlining yet? Where is it leaking from?
D
D
92 Citroen XM Prestige 3.0i Auto R.P5678
14 Mitsubishi L200 Trojan
89 Talbot Express 2.0 coach built Auto-trail Chinook
Addicted to Crackanory
14 Mitsubishi L200 Trojan
89 Talbot Express 2.0 coach built Auto-trail Chinook
Addicted to Crackanory
- raynoon
- Could do a 2.1 headgasket
- Posts: 1128
- Joined: Mon Aug 31, 2015 7:38 am
- Orga / RP numbers: 6043
- Location: Merseyside
Re: K-BAN has a new home
No, not put it all back together, wanted to be sure it wasn't leaking before I did. It's dripping down from the front right hand inside corner.
I suspect a flaw in the bonding. Will remove and try again. I blame Russ for using the "L" word...
I suspect a flaw in the bonding. Will remove and try again. I blame Russ for using the "L" word...
1993 Citroen XM 2.1 turboSD auto
1995 Citroen XM 2.1TD Auto EXCLUSIVE
1995 Citroen XM 2.1TD Auto EXCLUSIVE
- Dean
- Global Moderator
- Posts: 6116
- Joined: Wed Apr 15, 2009 7:53 am
- Location: Isle of wight
Re: K-BAN has a new home
Oh it is Russ' fault, no doubt about it.
In the mean time park the car facing up hill, that may help.
D
In the mean time park the car facing up hill, that may help.
D
92 Citroen XM Prestige 3.0i Auto R.P5678
14 Mitsubishi L200 Trojan
89 Talbot Express 2.0 coach built Auto-trail Chinook
Addicted to Crackanory
14 Mitsubishi L200 Trojan
89 Talbot Express 2.0 coach built Auto-trail Chinook
Addicted to Crackanory
- russ92xmsed
- Global Moderator
- Posts: 5733
- Joined: Mon Jun 11, 2012 5:23 pm
- Location: Cheltenham
- Contact:
Re: K-BAN has a new home
There are no excuses.... Cheeky bar stewards!
I really can't apologise enough Ray..
stupid slip of the tongue.
That is interesting. That's where mine kept letting in water. By the time I had sorted it, it was down to a slight seep. This is what I had to do to my sunroof to fix it....although I expect I hadn't put enough bonding sealant on that corner.
Check to see if you have any sealant that has splurged out from between the glass and the frame. That stops the weather seal from sealing it all properly. I found this on mine and removing the excess worked.
I found it's also easy to not get the seal to sit right around the corners. It can lift up a bit. A good rubber mallet helps.
I even ended up running a bead of black gasket sealant between the glass and under the seal once in place. That really helped. Not ideal any of it really, more fudges than real fixing.
Best of luck fixing it and I won't mention the L word again.


That is interesting. That's where mine kept letting in water. By the time I had sorted it, it was down to a slight seep. This is what I had to do to my sunroof to fix it....although I expect I hadn't put enough bonding sealant on that corner.
Check to see if you have any sealant that has splurged out from between the glass and the frame. That stops the weather seal from sealing it all properly. I found this on mine and removing the excess worked.
I found it's also easy to not get the seal to sit right around the corners. It can lift up a bit. A good rubber mallet helps.
I even ended up running a bead of black gasket sealant between the glass and under the seal once in place. That really helped. Not ideal any of it really, more fudges than real fixing.

Best of luck fixing it and I won't mention the L word again.

Russ
1992 K reg XM 2.1 Auto SED RP 5712
1992 K reg XM 2.1 Auto SED RP 5705 (D)
Also
2003 C5 2.2 HDI Exclusive
I sell Engine bay, 1990 COTY, Total & Club XM Sticker Decals
http://www.rjwcreativedesign.co.uk
1992 K reg XM 2.1 Auto SED RP 5712
1992 K reg XM 2.1 Auto SED RP 5705 (D)
Also
2003 C5 2.2 HDI Exclusive
I sell Engine bay, 1990 COTY, Total & Club XM Sticker Decals
http://www.rjwcreativedesign.co.uk
- Dean
- Global Moderator
- Posts: 6116
- Joined: Wed Apr 15, 2009 7:53 am
- Location: Isle of wight
Re: K-BAN has a new home

D
92 Citroen XM Prestige 3.0i Auto R.P5678
14 Mitsubishi L200 Trojan
89 Talbot Express 2.0 coach built Auto-trail Chinook
Addicted to Crackanory
14 Mitsubishi L200 Trojan
89 Talbot Express 2.0 coach built Auto-trail Chinook
Addicted to Crackanory
- russ92xmsed
- Global Moderator
- Posts: 5733
- Joined: Mon Jun 11, 2012 5:23 pm
- Location: Cheltenham
- Contact:
Re: K-BAN has a new home

Russ
1992 K reg XM 2.1 Auto SED RP 5712
1992 K reg XM 2.1 Auto SED RP 5705 (D)
Also
2003 C5 2.2 HDI Exclusive
I sell Engine bay, 1990 COTY, Total & Club XM Sticker Decals
http://www.rjwcreativedesign.co.uk
1992 K reg XM 2.1 Auto SED RP 5712
1992 K reg XM 2.1 Auto SED RP 5705 (D)
Also
2003 C5 2.2 HDI Exclusive
I sell Engine bay, 1990 COTY, Total & Club XM Sticker Decals
http://www.rjwcreativedesign.co.uk
- raynoon
- Could do a 2.1 headgasket
- Posts: 1128
- Joined: Mon Aug 31, 2015 7:38 am
- Orga / RP numbers: 6043
- Location: Merseyside
Re: K-BAN has a new home
It's ok Russ, I suspect it's to do with the bonding mastic, I had terrible trouble trying to get it out of the tube, even after heating it.
I'll strip it all down again and try to re-seal it.
Funny enough, I had the same problem on the corners, but the front ones seemed to fit well, I too also considered applying a light bead of sealant in the seal, I may do this second time round. It's all trial and error.
I'll strip it all down again and try to re-seal it.
Funny enough, I had the same problem on the corners, but the front ones seemed to fit well, I too also considered applying a light bead of sealant in the seal, I may do this second time round. It's all trial and error.
1993 Citroen XM 2.1 turboSD auto
1995 Citroen XM 2.1TD Auto EXCLUSIVE
1995 Citroen XM 2.1TD Auto EXCLUSIVE
- White Exec
- Citroen God!
- Posts: 6642
- Joined: Fri Mar 11, 2011 7:38 pm
- Orga / RP numbers: RP7165
1996 2.5TD saloon, Exclusive, Polar White
1992 BX19D Millesime, Sable Phenicien - Location: ex-Ealing, Cheshire, W.Sussex & Surrey. Now living in Sayalonga (Malaga, Spain)
Re: K-BAN has a new home
Must echo the less-than-perfect result when fitting a brand new edge seal to the glass and frame.
Found that the new seal tended to ripple/pucker at the corners, and even did the same where it passed over a bit of steel frame that wasn't in perfect condition (despite removing all rusted/swollen metal).
In the end, as well as polyurethane sealant on all the surfaces, I needed to use a number of spring clips to hold parts of the seal in contact with the glass top surface, while the sealant cured.
Trimmed off the excess, and it hasn't leaked, but is less than perfect looking. Did also find that the new edge seal was an extremely tight fit in the roof aperture, and wouldn't shut under motor power, despite being properly aligned. It needed firmly easing into the closed position, by hand and with short bursts of the motor. Guess that factory-fitted sunroofs were never tight for the original customer, because the cars could have sat around for months or years before sale, allowing the seal to ease!
Found that the new seal tended to ripple/pucker at the corners, and even did the same where it passed over a bit of steel frame that wasn't in perfect condition (despite removing all rusted/swollen metal).
In the end, as well as polyurethane sealant on all the surfaces, I needed to use a number of spring clips to hold parts of the seal in contact with the glass top surface, while the sealant cured.
Trimmed off the excess, and it hasn't leaked, but is less than perfect looking. Did also find that the new edge seal was an extremely tight fit in the roof aperture, and wouldn't shut under motor power, despite being properly aligned. It needed firmly easing into the closed position, by hand and with short bursts of the motor. Guess that factory-fitted sunroofs were never tight for the original customer, because the cars could have sat around for months or years before sale, allowing the seal to ease!
Chris
1996 XM 2.5TD Exclusive RP7165 Polar White
1992 BX19D Millesime RP5800 Sable
1989 BX19RD Delage Red Deceased; 1998 ZX 1.9D Avantage auto Triton Green Company car 1998..2001; 2001 Xantia 1.8i auto Wicked Red Company car 2001..2003
1996 XM 2.5TD Exclusive RP7165 Polar White
1992 BX19D Millesime RP5800 Sable
1989 BX19RD Delage Red Deceased; 1998 ZX 1.9D Avantage auto Triton Green Company car 1998..2001; 2001 Xantia 1.8i auto Wicked Red Company car 2001..2003
- russ92xmsed
- Global Moderator
- Posts: 5733
- Joined: Mon Jun 11, 2012 5:23 pm
- Location: Cheltenham
- Contact:
Re: K-BAN has a new home
I had the exact same issue. It was so difficult getting the damn stuff out the tube.raynoon wrote:It's ok Russ, I suspect it's to do with the bonding mastic, I had terrible trouble trying to get it out of the tube, even after heating it.
I'll strip it all down again and try to re-seal it.
Funny enough, I had the same problem on the corners, but the front ones seemed to fit well, I too also considered applying a light bead of sealant in the seal, I may do this second time round. It's all trial and error.
Russ
1992 K reg XM 2.1 Auto SED RP 5712
1992 K reg XM 2.1 Auto SED RP 5705 (D)
Also
2003 C5 2.2 HDI Exclusive
I sell Engine bay, 1990 COTY, Total & Club XM Sticker Decals
http://www.rjwcreativedesign.co.uk
1992 K reg XM 2.1 Auto SED RP 5712
1992 K reg XM 2.1 Auto SED RP 5705 (D)
Also
2003 C5 2.2 HDI Exclusive
I sell Engine bay, 1990 COTY, Total & Club XM Sticker Decals
http://www.rjwcreativedesign.co.uk