Wanted bits to finish my Mk1 ES9 V6 Auto 2000W Reg

Selling off one (or bits :o) of your XM collection, or perhaps searching for those elusive headlight washer covers? This is the place to do it.
jamesnoble
Knows how to use the parking brake
Posts: 71
Joined: Thu Sep 19, 2013 10:21 am

Wanted bits to finish my Mk1 ES9 V6 Auto 2000W Reg

Post by jamesnoble » Sun Apr 10, 2016 6:23 pm

I love my XM!

You may remember that I have a late 2000 W reg V6 24V Auto and my mission was to create a facsimile of an early S1 but with all the features of the latest and most developed XM. My car now boasts the original alloys with the big central hub cabs, full Series 1 interior including dash and door trims, Mk1 nose cone and boot spoiler. I need a few (proving impossible to find) parts to finish:

Mk2 under front bumper towing eye covers (drivers side needed but will take both if you have them)
Mk1 Leather Single spoke steering wheel (I currently have a non leather single spoke wheel fitted)
Genuine Citroen carpet overmats in black (front and rear). Second hand is fine as long as they have some life left in them

Hope you can help me. I know these parts are difficult to find.

James
Citroens: XM V6 24v ES9, CX GTi Turbo 2 Familiale "The Flying Cigar", AX TGE1.1
Previous Citroens: C6 V6 Exclusive Petrol, XM V6 SEi Man, XM V6 Exclusive Auto ZPJ, BX14, 2CV Dolly, Visa "Van Rouge", CX 25 RI Familiale

citroenxm
Global Moderator
Posts: 9987
Joined: Wed Apr 15, 2009 9:11 am
Location: North Wales - FAR far far away!!! :-p

Re: Wanted bits to finish my Mk1 ES9 V6 Auto 2000W Reg

Post by citroenxm » Sun Apr 10, 2016 6:28 pm

Soooo.. You have then prooved s1 dash will fit an s2 pedal box and heater.. However there is no reason it shouldnt..

Will you or have you done a pictorial of this transformation?? Im a big S1 fan and not as keen on s2 dash.. But would also happy convert an s2 into s1..
Projects:(eventually if theres any bodywork left)
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual

Others
In use.. 1995 M reg S2 2.1td auto exclusive

citroenxm
Global Moderator
Posts: 9987
Joined: Wed Apr 15, 2009 9:11 am
Location: North Wales - FAR far far away!!! :-p

Re: Wanted bits to finish my Mk1 ES9 V6 Auto 2000W Reg

Post by citroenxm » Sun Apr 10, 2016 6:30 pm

Can i also ask.. How have you over come the air bag warning light?? After a certain year in the uk they MUST work to pass an mot here.. Or are you cheating with a simple circuit..??
Projects:(eventually if theres any bodywork left)
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual

Others
In use.. 1995 M reg S2 2.1td auto exclusive

Dieselman
Global Moderator
Posts: 14454
Joined: Thu Jun 18, 2009 6:44 pm

Re: Wanted bits to finish my Mk1 ES9 V6 Auto 2000W Reg

Post by Dieselman » Sun Apr 10, 2016 6:46 pm

A resistor will cheat the airbag detector...but technically the car will fail an MOT test as the sirbag lamp won't run through it's test sequence.

Unless James has installed an airbag warning lamp into the dash cluster.
91 3.0 sei M. 4852 EXY Black
92 2.1 sed M. 5740 ECZ Sable Phenicien
92 3.0 V6-24. 5713 EXY Black
92 2.1 sd M. 5685 ENT Blue Sideral
Prev
90 2.1sd M. 5049 EJV Mandarin
92 2.1sd A. 5698 EJV Mandarin
94 2.1sd A. 6218 ERT Triton
91 2.0si M. 5187 EWT White

citroenxm
Global Moderator
Posts: 9987
Joined: Wed Apr 15, 2009 9:11 am
Location: North Wales - FAR far far away!!! :-p

Re: Wanted bits to finish my Mk1 ES9 V6 Auto 2000W Reg

Post by citroenxm » Sun Apr 10, 2016 6:50 pm

Yea, I thought that with the MOT issue Will...
Projects:(eventually if theres any bodywork left)
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual

Others
In use.. 1995 M reg S2 2.1td auto exclusive

User avatar
russ92xmsed
Global Moderator
Posts: 5733
Joined: Mon Jun 11, 2012 5:23 pm
Location: Cheltenham
Contact:

Re: Wanted bits to finish my Mk1 ES9 V6 Auto 2000W Reg

Post by russ92xmsed » Sun Apr 10, 2016 7:11 pm

This will be very interesting to see. Wonder how difficult it was to do....
Russ

1992 K reg XM 2.1 Auto SED RP 5712
1992 K reg XM 2.1 Auto SED RP 5705 (D)
Also
2003 C5 2.2 HDI Exclusive

I sell Engine bay, 1990 COTY, Total & Club XM Sticker Decals
http://www.rjwcreativedesign.co.uk

citroenxm
Global Moderator
Posts: 9987
Joined: Wed Apr 15, 2009 9:11 am
Location: North Wales - FAR far far away!!! :-p

Re: Wanted bits to finish my Mk1 ES9 V6 Auto 2000W Reg

Post by citroenxm » Sun Apr 10, 2016 7:43 pm

I do think the S1 dash will go striaght over the pedal box and heater etc, so I think actual dash fitment wont be hard at all to go in...
Projects:(eventually if theres any bodywork left)
93 L Xm 2.1t D auto project
93 L xm V6 12v Sei Manual

Others
In use.. 1995 M reg S2 2.1td auto exclusive

jamesnoble
Knows how to use the parking brake
Posts: 71
Joined: Thu Sep 19, 2013 10:21 am

Re: Wanted bits to finish my Mk1 ES9 V6 Auto 2000W Reg

Post by jamesnoble » Sun Apr 10, 2016 8:12 pm

You are right; a resistor of the correct value will allow the the light to extinguish after the test cycle and also allow the side airbags to remain fully functiona ;) l. Anybody have any joy with the parts I am after?
Citroens: XM V6 24v ES9, CX GTi Turbo 2 Familiale "The Flying Cigar", AX TGE1.1
Previous Citroens: C6 V6 Exclusive Petrol, XM V6 SEi Man, XM V6 Exclusive Auto ZPJ, BX14, 2CV Dolly, Visa "Van Rouge", CX 25 RI Familiale

jamesnoble
Knows how to use the parking brake
Posts: 71
Joined: Thu Sep 19, 2013 10:21 am

Re: Wanted bits to finish my Mk1 ES9 V6 Auto 2000W Reg

Post by jamesnoble » Sun Apr 10, 2016 8:20 pm

Unless James has installed an airbag warning lamp into the dash cluster.
All S2 circuits remain so the cars original (S2) instrument cluster is used; they are the same basic item is S1 but internals change. For example the ES9 V6 incorporates oil temp guage as well as airbag warning light. Same for dot matrix etc. :)
Citroens: XM V6 24v ES9, CX GTi Turbo 2 Familiale "The Flying Cigar", AX TGE1.1
Previous Citroens: C6 V6 Exclusive Petrol, XM V6 SEi Man, XM V6 Exclusive Auto ZPJ, BX14, 2CV Dolly, Visa "Van Rouge", CX 25 RI Familiale

xmexclusive
Global Moderator
Posts: 5925
Joined: Wed Apr 15, 2009 8:11 am

Re: Wanted bits to finish my Mk1 ES9 V6 Auto 2000W Reg

Post by xmexclusive » Sun Apr 10, 2016 9:01 pm

Have a number of spare tow eye covers.
Will part with any colour other than green ones and the primer set still in the Citroen bag.

John

Post Reply