Iv bought a xm 2.1td

[Jeppojepson]

Thanks dean i shall check that any diagram were the earths are at
There will be loads of odd question no doubt
I need to do a bit more reading on self pressurising the speres
I will do a full project build on the members area on friday

[citroenxm]

If its full blast it will be the transister board..

Check more then just cills.. boot floor chassis legs.. outriggers under the car behind the front jacking points.. floor box sections under the B pillar area and dont nust look prod! Ive seen them now where the underseal shape is still there but the metal behind it has vanished! !

Sitting ten years does NOT stop the rot at all... they can be worse for sitting!

[citroenxm]

If you want to know more.. check out the members cars area and seek out my blogs.. K21CEO is one to look through of mine and also a V6 24v Life is Spared is another of mine..

[Jeppojepson]

Hi dean i ment the interior fan
I will do a full up date in the members area on friday with regular updates
Need to find a xm for breaking next

I hope i dont offend to many purists but the car cosmetically is going army camo for help for heros as we have searving family a wounded vetran friend and my dad did 24 years in the reme
(This is not a sob story by the way just a apology for how the cars going to look on the outside lol)
Is there a recommended breaker you use
Also anybody able to help with pressurising spheres

[Jeppojepson]

Thanks guys we shall have a proper look round her

[citroenxm]

Spheres are cheap enough from aep glasgow aka citroen services.. about 25 a pair!!

[Dean]

There is no need to apologise, its just a car, i think its rather a nice touch bringing it back from certain scapage for one last hoorah.
Didnt realise you meant heater fan, as Paul says, it will be failed transistors.

D

[raynoon]

I have a scrapper here in Liverpool, depending what parts you need...

I also have a J plate 2.1 SED manual which runs great, I drove it back from the south coast of England, it even has working cruise control.
The MOT is up in January and it will need some welding, but not a great deal. I'm looking for £400 for it.

If you want to come over to Liverpool and have a look at a good working example send me a PM.

Ray.

[Jeppojepson]

Will have a full update tomoz with pics

[Dieselman]

I'm not a purist, but it does seem a shame to change the identity and originality of what is a pretty low mileage 2.1 SED manual.

I could probably find you another XM to use that has MOT, which would be a more suitable candidate for your run as it's less significant in terms of XM appeal.

Can you please let us know the state of the car you have.